Hermosos Portaretratos para niños de MICKEY y MINNIE con material reciclable || Beautiful MICKEY and MINNIE children's picture frames with recyclable material [ESP-ENG]

avatar

¡Hola amigos de HIVE!, en ésta oportunidad quise elaborar unos portaretratos con material reciclable, de los personajes que a mis hijos les encanta, como lo son Mickey y Minnie; muy sencillos y hermosos. Comencémos.

Hello friends of HIVE, This time I wanted to make some picture frames with recyclable material, of the characters that my children love, such as Mickey and Minnie; very simple and beautiful. Let's start.

IMG_20220303_010427.jpg

Separadores-7.png

Materiales:

Materials:

- Cartón (reciclado).- Cardboard (recycled).
- Retazos de cartulina roja y con estampado de corazón.- Red and heart patterned cardboard scraps.
- Hojas blancas.- White sheets.
- Pega.- Paste.
- Tijera.- Scissors.
- Regla.- Rule.
- Lápiz de grafito.- Graphite pencil.
- Pintura al frio negra.- Black cold paint.

IMG_20220303_011613.jpg


Paso 1:

Para comenzar, corté el cartón por la mitad, dibujé sobre cada uno un cuadro de 3cm cada lado, luego recorté para así tener la forma del portaretrato.

Step 1

To begin, I cut the cardboard in half, drew a 3cm square on each side, then cut it out to get the shape of the picture frame.

IMG_20220303_011547.jpg

Separadores-7.png

Paso 2:

Para las orejas, utilicé un trozo de cartón, coloqué un vaso al revés y marqué los circulos y luego recorté.

Step 2

For the ears, I used a piece of cardboard, placed a glass upside down and marked the circles and then cut out.

IMG_20220303_011808.jpg

Separadores-7.png

Paso 3:

En una hoja blanca dibujé las manos de Mickey y Minnie y recorté. Después con los trozos de cartulina estampada y roja recorté el lazo de Minnie y una tira (para el vestido)y para Mickey recorté una tira para el traje, con unos circulos pequeños que irían en el pantalón. Aparte con otra hoja blanca, recorté unas tiras del mismo grosor que el portaretrato para forrarlo por detrás.

Step 3:

On a white sheet I drew Mickey and Minnie's hands and cut them out. Then with pieces of printed and red cardboard I cut out Minnie's bow and a strip (for the dress) and for Mickey I cut out a strip for the suit, with some small circles that would go on the pants. With another white sheet, I cut strips of the same thickness as the picture frame to line the back.

IMG_20220303_011849.jpg

Separadores-7.png

Paso 4:

Con la pintura negra pinté los portaretratos y las orejas, al estar secos les pegué la tiras blancas por detrás para forrarlos, con cartulina les hice unos soportes para colocarlos atrás, de modo que la foto no se salga.

Step 4:

With the black paint I painted the picture frames and the ears, when they were dry I glued the white strips on the back to cover them, with cardboard I made some supports to place them on the back, so that the photo does not come out.

IMG_20220303_011739.jpg

Separadores-7.png

Paso 5:

Al tener todo listo, les pegué las orejas, el lazo, el traje de cada uno y las manos. En la parte de atrás les pegué unas tiras de cartón desde la base a la parte inferior del portaretrato para que éste se mantenga parado. A uno de ellos le coloqué una foto y ¡LISTO!. Colócalo en tu casa en el lugar donde desees.

Step 5:

Once everything was ready, I glued the ears, the bow, the costume and the hands. On the back I glued some strips of cardboard from the base to the bottom of the picture frame so that it would stand upright. I attached a photo to one of them and that's it! Place it in your home wherever you want.

IMG_20220303_011644.jpg


Esto fué todo amigos, una manualidad muy sencilla y divertida para los niños. Espero les haya gustado y puedan realizarlo.

This was all friends, a very simple and fun craft for children. I hope you liked it and you can make it.


Muchas Gracias !!!

Thank you very much!!!


Texto traducido en DeepL/ Text translated at DeepL

Separadores / Separators



0
0
0.000
4 comments