[Esp-Ing] 🐝 Hagamos unas abejitas. Ganchos para el cabello. Técnica de quilling, tutorial.

avatar

1.png

Hola a todos... 🐱🐾💕

Hola a mis queridos Hiver y a la querida comunidad de artistas #HiveDiy, deseándoles un día de muchas bendiciones, por acá les traigo un nuevo trabajo preparado como siempre con gran cariño y especialmente para ustedes.

En esta oportunidad les presento un bonito dije de abejita, realizado en la técnica de quilling, el cual decidí colocar en unos ganchitos para lucirlos en el cabello. Esperando sea de su agrado iniciemos con el paso a paso.

Si quieres disipar alguna duda con respecto a la técnica o paso a paso, usado en este post, puedes visitar el siguiente link, por acá abajo te lo dejo:

Figuras básicas en quilling

Diseño sin título (10).png

Hello everyone... 🐱🐾💕

Hello my dear Hiver and the dear community of artists #HiveDiy, wishing you a day of many blessings, here I bring you a new work prepared as always with great affection and especially for you.

This time I present you a nice little bee charm, made in the quilling technique, which I decided to place in some little hooks to wear them in your hair. Hoping you like it, let's start with the step by step.

If you want to dispel any doubts regarding the technique or step by step, used in this post, you can visit the following link, below:

Basic figures in quilling.

Diseño sin título (11).png

Comencemos:😃

Materiales:📏✏️✂️

• Cintas de quilling de 3mm de ancho, color negro y amarillo tostado. También pueden usar cintas amarillas, naranjas, o cualquier tonalidad de su presencia que asemeje los colores de una abejita, los cuales varían.
• Regla de circunferencia.
• Aguja para quilling.
• Tijera.
• Pega blanca.
• Perlas medias pequeñas color blanco.
• Cristal pequeño de bisutería.
• Pinza punta fina.
• Pinturas negra.
• Pinceles.
• Ganchos plateados.
• Resina.
• Solvente X
• Frasco de vidrio.

Diseño sin título (10).png

Let's get started:😃

Materials:📏✏️✂️.

  • 3mm wide quilling ribbons, black and tan yellow color. You may also use yellow, orange, or any shade of your presence that resembles the colors of a little bee, which vary.
  • Circumference ruler.
  • Quilling needle.
  • Scissors.
  • White glue.
  • Small white medium pearls.
  • Small costume jewelry glass.
  • Fine tip tweezers.
  • Black paints.
  • Brushes.
  • Silver hooks.
  • Resin.
  • Solvent X
  • Glass flask.

2.png

Paso a paso:💖

• Medidas de las cintas:🌈

En la imagen tienen especificadas las medidas y los colores a utilizar para cada pieza de una de las abejitas que vamos a llevar a cabo. En mi caso voy a realizar dos dijes ya que voy a elaborar dos ganchitos con dos abejitas.

Diseño sin título (10).png

Step by step:💖

- Measurements of the ribbons:🌈 **

In the image you have specified the measures and the colors to use for each piece of one of the bees that we are going to carry out. In my case I am going to make two charms since I am going to make two little hooks with two little bees.

3.png

• Empecemos con la cabeza: Vamos a tomar la cinta negra de 3mm de ancho x 20cms de largo, tomamos la aguja para quilling, enrollamos toda la cinta negra en ella y procedemos a realizar un círculo abierto en la medida número 7 de la regla de circunferencia, sellamos con pega.

  • Si desean observar el procedimiento de cómo realizar un circulo abierto y otras figuras que se van a llevar a cabo para este trabajo, al principio del post, les deje el link de la publicación en la cual explico cómo realizar algunas figuras básicas de quilling, los invito al ver el procedimiento del círculo cerrado detenidamente en el mismo.

Diseño sin título (10).png

  • Let's start with the head: Let's take the black ribbon 3mm wide x 20cms long, take the quilling needle, roll all the black ribbon on it and proceed to make an open circle in the measure number 7 of the circumference ruler, seal it with glue.

  • If you want to observe the procedure of how to make an open circle and other figures that will be carried out for this work, at the beginning of the post, I left the link to the publication in which I explain how to make some basic quilling figures, I invite you to see the procedure of the closed circle carefully in it.

4.png

Diseño sin título (11).png

5.png

• Vamos a colocar las antenitas de la abeja de una vez y a darle forma, ya que si las pegamos por separado se podrían despegar. Tomemos el circulo abierto que hemos realizado para la cabeza de la abejita y colocamos pega en todo su alrededor, vamos a colocar la cinta negra de 3mm de ancho x 10cms de largo que teníamos reservada para las antenas, vamos a cuadrar que queden de manera uniforme y armónica alrededor del círculo, quedando las dos puntas en medio en la parte de arriba del círculo. Una vez que selle la pega, tomamos la aguja de quilling y vamos a enrollar los extremos que quedaron de manera inversa, haremos uno a la vez, formando un espiral, de esta manera ya tendremos nuestras antenitas con forma.

Diseño sin título (10).png

  • Let's place the bee's antennae at once and give it shape, because if we glue them separately they could come unglued. Let's take the open circle that we have made for the head of the bee and place glue all around it, we will place the black ribbon 3mm wide x 10cms long that we had reserved for the antennas, we will square them evenly and harmoniously around the circle, leaving the two ends in the middle at the top of the circle. Once the glue is sealed, we take the quilling needle and we will roll the ends that were left in reverse, we will do one at a time, forming a spiral, in this way we will have our shaped antennas.

6.png

Diseño sin título (11).png

7.png

• Ahora vamos con las alas de la abeja, tomamos una de las cintas color amarillo de 3mm de ancho x 20cms de largo y haremos un circulo abierto en la medida 8 de la regla de circunferencia, repetimos el proceso con la otra cinta para forma la otra ala.

Diseño sin título (10).png

  • Now we go with the wings of the bee, we take one of the yellow ribbons 3mm wide x 20cms long and make an open circle in the measure 8 of the circumference ruler, repeat the process with the other ribbon to form the other wing.

8.png

• Listos los círculos abiertos de nuestras alas, vamos a darle forma de gota a cada círculo, con la ayuda de los dedos índice y pulgar pellizcamos una de las puntas de esta manera ya tendremos la forma de las alas.

Diseño sin título (10).png

  • Once the open circles of our wings are ready, we are going to give a drop shape to each circle, with the help of the index finger and thumb we pinch one of the tips in this way we will have the shape of the wings.

9.png

• Vamos con el cuerpo de la abeja, tomaremos la cinta de 3mm de ancho x 24cms de largo, y realizaremos un circulo abierto en la medida 10 de la regla de circunferencia, una vez lista le daremos forma de gota para tener el cuerpo.

Diseño sin título (10).png

  • Let's go with the body of the bee, we will take the 3mm wide x 24cms long ribbon, and we will make an open circle in the measure 10 of the circumference ruler, once ready we will give it a drop shape to have the body.

10.png

• Aprovechemos y demos detalle al cuerpo antes de unir las piezas, tomemos dos o tres trocitos de cinta amarilla, y se la colocamos a lo largo en la pieza del cuerpo.

Diseño sin título (10).png

  • Let's take advantage and give detail to the body before joining the pieces, take two or three pieces of yellow ribbon, and place it lengthwise on the body piece.

11.png

• Ahora vamos a unir todas las piezas para formar la abeja, colocamos pega a las alas uniremos a la cabeza, luego ponemos pega al cuerpo y lo colocamos.

Diseño sin título (10).png

  • Now we are going to join all the pieces to form the bee, we put glue to the wings we will join to the head, then we put glue to the body and we place it.

12.png

Diseño sin título (11).png

13.png

• Coloquemos un cristal de bisutería pequeño en medio de las alas para darle un toque de brillo a la pieza. Ponemos un punto de pega, y con la ayuda de la pinza punta fina agregamos el cristal.

Diseño sin título (10).png

  • Place a small costume jewelry crystal in the middle of the wings to give a touch of shine to the piece. Put a point of glue, and with the help of the fine tip tweezers add the crystal.

14.png

• Coloquemos ojitos a la abejita, tomamos dos perlas medias pequeñas de bisutería, ponemos dos puntitos de pega en medio de la cabeza y colocamos las perlitas, una vez pegadas tomamos un pincel punta fina, la pintura negra y pintamos dos puntitos negros, al secar la pintura agregamos un poco de pega blanca para evitar que se borren los ojitos, dejamos que seque la pega.

Diseño sin título (10).png

  • Let's put eyes on the little bee, we take two small medium-sized costume jewelry beads, we put two small dots of glue in the middle of the head and place the beads, once glued we take a fine tip brush, black paint and paint two black dots, when the paint dries we add a little white glue to prevent the eyes from being erased, let the glue dry.

15.png

Diseño sin título (11).png

16.png

Diseño sin título (11).png

17.png

• Vamos a tomar un trozo de cinta puede ser de la negra y la colocaremos en la parte trasera de la abeja, esa es para pegar en el gancho y evitar que se salga la pieza cuando la coloquemos en su gancho.

• Les mostré el proceso para una sola abeja como les dije anteriormente, pero pueden repetir el proceso según cuantas abejitas quieran obtener, o pueden preparar todos sus materiales y realizar varias al mismo tiempo.

Diseño sin título (10).png

  • We are going to take a piece of tape, it can be a black one, and place it on the back of the bee, this is to stick it on the hook and prevent the piece from coming off when we place it on its hook.

  • I showed you the process for a single bee as I said before, but you can repeat the process depending on how many bees you want to get, or you can prepare all your materials and make several at the same time.

18.png

• Ahora le colocaremos su protección liquida a las abejas, tomamos el frasco de vidrio, colocamos una parte de resina artística, otra de solvente x, revolvemos con un pincel y aplicamos en todas las partes de la abeja, dejemos solo los extremos de la cinta que colocamos por detrás sin resina para poder colocar en el gancho con pega, dejamos secar de un día para otro nuestra abejita.

Diseño sin título (10).png

  • Now we will place its liquid protection to the bees, we take the glass bottle, we place a part of artistic resin, another part of solvent x, we stir with a brush and apply in all the parts of the bee, we leave only the ends of the tape that we place behind without resin to be able to place in the hook with glue, we let dry from one day to another our little bee.

19.png

• Vamos a colocar las abejitas a los ganchitos, decidí de manera opcional colocarle a los ganchos unos trocitos de cinta amarillo tostado de manera diagonal para que resalten, ustedes deciden si quieren colocarle algún adorno, forrarlos o colocar las piezas en los ganchitos sin ningún tipo de adorno.

• Para añadir la pieza a los ganchos colocamos pega a los trozos de cinta que se les coloco en la parte trasera, cerramos y esperamos que sellen, una vez sellados, tomamos con el pincel un poquito de resina y le ponemos un poco, de esta manera se va a plastificar la cinta y las piezas no se saldrán de los ganchos, quedaran bien protegidos y resistentes.

• De esta manera tenemos los ganchitos con sus dijes de abejita, listos para su uso.

Diseño sin título (10).png

  • We are going to place the little bees on the hooks, I decided to optionally place some pieces of yellow ribbon on the hooks diagonally to make them stand out, you decide if you want to place any ornament, line them or place the pieces on the hooks without any kind of ornament.

  • To add the piece to the hooks we put glue to the pieces of tape that were placed on the back, close and wait for them to seal, once sealed, we take with the brush a little bit of resin and put a little bit, this way the tape will be plasticized and the pieces will not come off the hooks, they will be well protected and resistant.

  • In this way we have the hooks with their bee charms, ready for use.

20.png

Resultado Final:💕

Diseño sin título (10).png

Final Result:💕

21.png

Extra:✨

• En el proceso de elaboración, no resistí la tentación de hacer otra abejita, a la cual le coloqué una argolla entre el medio de la cabeza y antenas, para montarla en un collar para uso personal jajajaja. De esta manera se pueden dar cuenta que el dije nos sirve para la elaboración de cualquier tipo de detalles, para los ganchitos, un cintillo, para colocarlo en un collar, y si se le coloca una base fija o colgante para zarcillos también podemos lucirlos de esa manera. Los zarcillos me los debo, próximamente me los hare para completar el conjunto😁.

Diseño sin título (10).png

Extra:✨.

  • In the process of elaboration, I did not resist the temptation to make another bee, to which I placed a ring between the middle of the head and antennae, to mount it on a necklace for personal use hahahaha. This way you can see that the pendant can be used to make any kind of details, for hooks, a headband, to place it on a necklace, and if you place a fixed base or a pendant for earrings you can also wear them that way. I owe the earrings to myself, soon I will make them to complete the set😁.

22.png

Diseño sin título (11).png

¿Que les pareció, les gustó?

Espero que sí, que les haya gustado mi explicación, procedimiento y fotos, los hice con mucho cariño por y para ustedes.

"Deja salir esa musa que te inspira, y deja volar tu imaginación".

Gracias a todos, nos vemos en la próxima. 🐾🐱💕

Diseño sin título (10).png

What did you think, did you like it?

I hope you did, I hope you liked my explanation, procedure and photos, I made them with love for you.

"Let out that muse that inspires you, and let your imagination fly".

Thank you all, see you next time. 🐾🐱💕

Diseño sin título (11).png

Todas las fotos usadas en este post son de mi autoría y han sido sacadas en mi celular personal un Redmi 9T y editadas Canva

Divisores y banner hechos por mí en Paint Tool Sai

Traducido con la ayuda de DeepL

Diseño sin título (10).png

All photos used in this post are of my authorship and have been taken on my personal cell phone a Redmi 9T and edited in Canva

Dividers and banner made by me in Paint Tool Sai

Translated with the help of DeepL

Separadordaya.jpg

Bannerdayadam.jpg



0
0
0.000
34 comments
avatar

My Fav colours, look really good.

0
0
0.000
avatar

Thank you very much @opochtli. I'm glad you liked them. Thanks for stopping by. Many blessings.💕

0
0
0.000
avatar

Congratulations @dayadam! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You published more than 30 posts.
Your next target is to reach 40 posts.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

To support your work, I also upvoted your post!

Support the HiveBuzz project. Vote for our proposal!
0
0
0.000
avatar

tu creatividad es de primera

0
0
0.000
avatar

Muchísimas gracias @joydukeson. Se aprecia muchísimo tu comentario. Gracias por pasar por acá. Saludos💕

0
0
0.000
avatar

It looks really great! And working with such small details is a special level! I was just changing my screen on my iphone today, there are very small bolts, I was incredibly tired in an hour). I can imagine how much energy it took you to do this job. 👍💪
!WINE

0
0
0.000
avatar
(Edited)

Thank you very much @stdd. I am delighted that you liked it. It is work of such small pieces is laborious and somewhat tiring for the vision, and you have to be patient, but the end result is very rewarding, I really like to work elaborating small charms, as they look quite delicate. I can imagine your work with the phone, while we do it we have to take breaks. Thanks for stopping by and for your motivating comment. I hope to see you back on my blog. Thank you for your support Greetings and blessings... 💕🌈💐

0
0
0.000
avatar

❤️🙌💝

0
0
0.000
avatar

Qué alegría ver que de nuevo estés publicando, y especialmente algo tan bien hecho y explicado con un resultado final hermoso.

0
0
0.000
avatar

Gracias amigo @fixie, para mí la alegría es aún mayor de leerte por aquí con tus comentarios tan hermosos y alentadores. Espero poder agarrar el ritmo nuevamente y que la situación ayude. Debo tener paciencia y trabajar lo que pueda sin estresarme, mi propia hija me dijo mamá tranquila y con calma, así solo puedas por ahora publicar una vez a la semana hazlo con calma si no te vas a enfermar. Y tú sabes amigo lo que conlleva un tutorial y yo soy muy ostinada para editar, me gusta que todo se vea bonito, saco mil fotos, trabajo más de la cuenta jajajaja, creo que tengo que aprender a minimizar un poco el trabajo, me lleva hasta tres días hacer esto, (no la pieza, aunque depende lo que haga y el nivel de dificultad), y con los problemas de luz e internet se hacen interminables. Pero los resultados siempre son gratificantes así sea para uno mismo. Me alegra mucho que te haya gustado lo que hice. Un gran abrazo y bendiciones💕☺️💐🌈🐦😘

0
0
0.000
avatar

Muy buen consejo de tu hija, y se nota que lleva tus genes al ser tan sabia. Tiene mucha razón, sin prisa pero sin pausa. Lo mejor es que quede hermoso, como siempre lo haces, y especialmente agradable de leer y ver, por que la redacción es tan impecable como los ángulos de tus fotografías. Todo el tiempo que no puedas aprovechalo en traer nuevas ideas para que esa creatividad no se detenga. Entiendo perfectamente cada una de tus palabras, así que, Adelante!

0
0
0.000
avatar

Que lindos🥰

💙✨🎊🌷🌺🐞💖🌻💜🎉💐🍄🌈⭐🌹🌱🌙🍁🌳🌟🌲🌼🏵️💮🌸🌵🍀💫🍂🥀🌺🌷🎊✨💙

0
0
0.000
avatar

Gracias cariño @chacald.dcymt. Que bueno que te hayan gustado, y gracias por pasar por aqui. Un gran abrazo... ☺️💐🌈🐦😘

0
0
0.000
avatar

Que hermoso trabajo amiga, me encantaron 💕

0
0
0.000
avatar

Gracias amiga bella. Me alegra que te gustaran. Espero tu príncipe ya este muchísimo mejor hoy. Abrazos @irenenavarroart ✨💕

0
0
0.000
avatar

Wow
That's really a touch of professionalism

0
0
0.000
avatar

Thank you very much @sperosamuel15. Beautiful comment and very motivating. Thanks for stopping by. Welcome whenever you want. A thousand blessings. ✨💕

0
0
0.000
avatar

Una publicación con estructura instruccional muy buena! Felicitaciones. Bello trabajo.

0
0
0.000
avatar

Muchísimas gracias por tu comentario tan motivador @belkisa758. Me alegra hayas pasado por acá. Abrazos y bendiciones. ❤️

0
0
0.000
avatar

Un trabajo muy minucioso; no es tan fácil hacer manualidades tan pequeñas debe tener uno mucha paciencia te felicito amiga y las abejitas en esos gancho se ven muy cuchi 🤩🥰feliz dia amiga

0
0
0.000
avatar

Gracias amiga bella @zullyarte. Feliz de leerte por aquí. Gracias por tu apoyo y tus comentarios hermosos. Besos y bendiciones. Que tengas bello día corazón.💕

0
0
0.000
avatar

Que cosita tan bella y tierna. Te felicito por este trabajo tan bonito.

0
0
0.000
avatar

Gracias corazón @soyaruska. Me alegra tanto que te haya gustado. Mil gracias por pasar por aquí, y por tu comentario tan hermoso. Bienvenida a mi blog cuando lo desees. Besos y mil bendiciones. 💖

0
0
0.000
avatar

Que hermoso resultado, debo decir que el extra es mi preferido jeje aunque ambos están igual de hermosos, se nota que pusiste mucho empeño en la estructura del post, gracias por ofrecer contenido de calidad.

0
0
0.000
avatar
(Edited)

Mil gracias corazón @jennyzer por pasar por acá y por tu bello comentario tan motivador por mi trabajo. Le puse empeño a todo desde que comencé a sacar la primera foto y a realizar la primera pieza. Estoy bien satisfecha de los comentarios y respost que recibí eso me hace saber que lo estoy haciendo bien y debo seguir adelante, muchísima gente me valoro en esa parte. En esta oportunidad quise poner mi pieza en unos ganchitos para salir de la rutina, siempre monto mis pequeñas piezas en collares, zarcillos y pulseras ya que me dedico a realizar bisutería. De verdad gracias, eres bienvenida a mí humilde blog cuántas veces lo desees. Espero seguír viéndote por acá. Besos y bendiciones. Que tengas un hermoso día. 🥰💕😘🙏🏻🌈

0
0
0.000
avatar

Siempre que veo uno de tus trabajos me gustan mucho.

Este en especial me gusta más, por las pinzas que es lo que me gusta hacer.

Estas piezas que haces quedarían bellos como centro de los lazos que hago en cintas y telas.

A ver si un día me motivo a comprar material para hacerlos con ese fin.

Lo que pasa es que todo cuanto me gusta voy comprando material y dejando por ahí, para cuando lo requiera.

Pero ahora como todo esta tan costoso, no me he dado ese lujo.

Felicidades y bendiciones por tu trabajo.

0
0
0.000
avatar

Gracias mi corazón @leidimarc por tus bellas palabras, siempre tan llenas de cariño y mensaje motivador. Me alegra que te guste mi trabajo. Anímate a realizarlo, y si tienes alguna duda por aquí estoy a la orden para cualquier cosa. Un fuerte abrazo y mil bendiciones para ti también... 💕

0
0
0.000