How I fixed customer's iPhone 6s plus

How I fixed customer's iPhone 6s plus

Image from gallery

Good day everyone, I am delighted to write about my skill here. It has been 6 years doing the business, and it has been divine grace .this is my first time posting here, and I know that I will be welcomed.

Repairing of phones and laptops is what I do for a living, today my post is going to be informed of introduction and I will be giving some step by step on how I replaced my customer's iPhone 6s plus. I hope you would like it?
Here we go :

Image from gallery

Step 1: Gather the necessary tools and materials.

The following equipment and supplies are required to replace the screen on an iPhone 6s Plus:

— Replacement screen assembly

— Small Phillips screwdriver

— Small suction cup

— Plastic opening tool

— Tweezers

— Pantalone screwdriver

— Adhesive strips or double-sided tape

— Heat gun or hairdryer (optional)

Step 2: Power off the iPhone.
Make sure the iPhone is off before starting the screen replacement procedure. When the “slide to power off” option shows on the screen, press and hold the power button. To totally turn off the device, slide it.

Step 3: Remove the two bottom screws.

The two screws on either side of the charging port at the bottom of the iPhone can be removed using the Pantalone screwdriver. Place the screws aside in a secure location.

Step 4: Use the suction cup to lift the display.
The home button should be placed above the suction cup, which you should then gently lift upward to leave a small space between the screen and the frame. To protect the display, take care not to exert too much pressure.

Step 5: Insert the plastic opening tool.

.Put the plastic opening tool within the small opening you just made. To separate the display component from the frame of the iPhone, slide it along the edge of the device. To avoid any harm, take your time and proceed with caution.

Step 6: Lift the display assembly.
Utilizing the plastic opening tool, gently pry open the display assembly from the bottom. Keep an eye out for any wires that are still connected to the iPhone.

Step 7: Disconnect the cables.

Find the connectors that join the iPhone's logic board and display assembly. Carefully disconnect these cables using the tweezers or a plastic opening tool. Cables for the front camera and digitizer should be connected last, then the display cable.

Step 8: Remove the display assembly.
You may fully remove the display assembly away from the iPhone once all cables have been unplugged. Leave it alone.

Step 9: Transfer components to the new screen.
You will need to move components from the old screen to the new one if the replacement screen assembly does not include the home button, front camera, or earpiece speaker. Take care to remove these parts properly, then affix them on the replacement screen using the appropriate tools.

Step 10: Install the new screen assembly.

Align the replacement screen assembly with the iPhone's frame with care. To make sure it fits securely, gently press down. Verify that the connectors are positioned correctly in relation to the logic board.

Step 11: Reconnect the cables.

Reconnect the cables in the opposite direction from how you disconnected them using the tweezers or plastic opening tool. Cables for the front camera and digitizer should be connected first, then the display cable.

Step 12: Secure the display assembly.

Carefully lower the display component onto the iPhone's frame after the cables have been attached. To establish a solid connection, press hard. When the connectors are properly seated, you may hear a click.

Step 13: Replace the two bottom screws.
On either side of the charging port on the bottom of the iPhone, use the Pantalone screwdriver to insert the two screws. To keep the display assembly in place, carefully tighten them.

Step 14: Power on the iPhone.
Hold down the power button while waiting for the Apple logo to show on the screen. Test the new screen to make sure it works once the iPhone has turned on.

Image from gallery

Congratulations! Your iPhone 6s Plus's screen has been successfully changed. Consult a specialist or ask me more if you run into any problems or obstacles because I'll be here to help you if you need it.

Designed on canva