RE: Work progresses on my Son's skid-steer.
You are viewing a single comment's thread:
They always pull me in when they have trouble, and these last two were trouble! But if things work out, they will go back on tomorrow; with a new wheel, getting close now.
We still have a hydraulic heat radiator that needs work, and maybe a spindle valve that needs new seals ( too many leaks before to test).
The fish tape is a tool for pulling wire into long runs of conduit. https://www.amazon.com/Yaetek-Electrician-Wires-Cable-Puller/dp/B06VSPGJDN/ref=asc_df_B06VSPGJDN?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80127027724180&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=m&hvlocint=&hvlocphy=&hvtargid=pla-4583726553521345&psc=1
But it substitutes well for hoses! You just need to be careful on the leading edge, so the dirt doesn't get into the connectors. It worked pretty well....
👍💙🤠💗😋🤕😁
Oh it's exciting that you're almost there. I would imagine that it will come in super handy for all sorts of things once you have it running. Best of luck with those new seals and the radiator, hope it isn't too labour intensive.
Ok now I can see the gadget properly, I couldn't make it out from the photo. Haven't seen those here but I've learned something today, thanks for the clarity. Appreciate your time in dropping the link.
Have a great Sunday
Everyone should have a fish tape...very handy toy!
Hoping tomorrow will finish the hydraulics and put good rubber on the dirt! Once we have the fluid added, we can move it down to where we can pressure wash it. There is some steel repairs needed still, but it will be usable before these steel repairs are done.
As with all tools, it will need some tender loving care. But it should do a lot of work for us!
💗🤠💙👍🤕😁