Mascara en 3D de Pantera para Halloween | 3D Panther Mask for Halloween
Hola queridos amiogos d eHive, me uno a la iniciativa d Halloween y para esto he creado una mascara de Pantera en 3D, con tan solo cartulina para realizarla y otros elementos faciles de tener en casa.
HAlloween es una fecha de terror y espanto, diulces pero sobre todod destacan los trajes y disfraces, pero tambien las mascaras. Uno de mis personajes favoritos de Marvel es la pantera, y he aprovechado esta ocasion para realizar una mascara con esta tematica.
Espero les guste!
Los Materiales que vamos a necesitar serán los siguientes:
- Cartuilina negra
- Silicon al frio
- Regla
- lapiz
- hoja de maquina blanca
- tijera
Paso a Paso
1
Para relalizar la mascraa lo primero que debemos hacer es dopblar la cartulina a la mitda, y desde el puntro medio del dobles, vamos a diseñar la cara de nuestra pantera.Luego con la tijera vamos a recortar la silueta de la cara. Desde el medio de la cara en la parte superiro de esta vamos a trazar una linea de 4 cm hacia abajo, luego tommaos una distancia de 8 cm para hacer las otras lineas. En total vamos a dibujar 8 lineas.
2
Luego tiomamos la tijera y amos a recotra la lineas que hemos trazados, asi mismo debemos pegar los cortes que hemos realizado, para ir formando los dobles etre estas lineas y asi se va ir formando la cara #D de nuestra mascara.
3
Seguidamenete debemos formar los ojos de la cara de la pantear, en ambos lados y con la ayuda de kla tijera se va a recortar este deiseño de los ojos.
4
Luego para crear el hocico de la cara de nuestra pantera debemos tomar un rectangulo y doblarla, y de esta forma dibujar la mitad de la nariz, luego debemos recortar el diseño con la tijera, en ambos lados de la nariz debemos hacer un corte y unir a la vez esos extremos con el silicon al frio y demenos pegar la nariz en la parte central d ela cara de la pantera.
5
Seguidamente debemos recortar varias cintas de la hoja blanca para pegarlas en la cara de la pantera y asi crear el diseño carcateristicos de la Pantera de MARVEL.
Espero que les guste este diseño elaborado de una maera facil, tambien pueden crear otros persojes partiendo de este diseño principal.
Muchas gracias familia de Hive, mucha suerte en el concusro y felicidades para todos.
- Las imagenes me pertenecen
- Traductor: Deepl Traslator
- Banner: Canva
Hello dear friends of eHive, I join the Halloween initiative and for this I have created a 3D Panther mask, with only cardboard to make it and other elements easy to have at home.
HAlloween is a date of terror and fright, candy but especially costumes and disguises, but also masks. One of my favorite Marvel characters is the panther, and I have taken this opportunity to make a mask with this theme.
I hope you like it!
The materials we are going to need are the following:** ** Black carthuilline
- Black carthuiline
- Cold silicon
- Ruler
- pencil
- white machine blade
- scissors
**Step by Step
1
To make the mask the first thing to do is to fold the cardboard in half, and from the middle point of the double, we will design the face of our panther, then with the scissors we will cut out the silhouette of the face. From the middle of the face on the upper part of the face we will draw a 4 cm line downwards, then we will take a distance of 8 cm to make the other lines. In total we will draw 8 lines.
2
Then we take the scissors and we are going to cut the lines that we have drawn, we must also paste the cuts that we have made, to form the doubles between these lines and thus we will be forming the face # D of our mask.
3
Next we must form the eyes of the face of the mask, on both sides and with the help of the scissors we will cut out the design of the eyes.
4
Then to create the muzzle of the face of our panther we must take a rectangle and fold it, and in this way draw half of the nose, then we must cut the design with the scissors, on both sides of the nose we must make a cut and join at the same time those ends with the cold silicone and glue the nose in the central part of the face of the panther.
5
Next we must cut several ribbons from the white sheet to glue them on the face of the panther and thus create the characteristic design of the Panther of MARVEL.
I hope you like this design made in an easy way, you can also create other characters from this main design.
Thank you very much Hive family, good luck in the contest and congratulations to all.
- Las imagenes me pertenecen
- Traductor: Deepl Traslator
- Banner: Canva
For the best experience view this post on Liketu
Te quedo bastante simpatica la mascara, muy bien elaborada. Gracias por regalarnos tu proceso creativo. Suerte en el concurso @rodriguezkike232 ✨
!DIY
Muchas gracias amiga.
Good job, you have a very well elaborated mask. Thanks for your participation in the contest. Good luck
Thank you
You can query your personal balance by
!DIYSTATS
Excelente máscara amigo, me encanto tu paso a paso.
Muchas gracias querida amiga
This is very creative, you did an amazing job, kudos👍
thank you
Muy bonita tu mascara 3D
Muchgas gracias amiga
Se ve genial esta manualidad. te quedó bonita y fácil de hacer.
Quiero también participar, voy a ver qué logro hacer.
Wow qué hermosa y maravillosa creación he quedado totalmente maravillada y enamorada el día de hoy he aprendido algo nuevo Me encantó.
felicitaciones.
Hermosa tu manualidad, me gustó el proceso de elaboración, maravillosa lo haces ver muy fácil de hacer. Gracias por compartir tu obra de arte
Congratulations @rodriguezkike232! You received a personal badge!
You can view your badges on your board and compare yourself to others in the Ranking