Pantuflas DIY [ESP - ENG]

Pantuflas DIY_20240416_163244_0000.jpg


IMG_20240416_163912.jpg


Hola mis queridos amigos de Hive, feliz martes para todos. El día de hoy quiero compartir con ustedes un nuevo proyecto que me tomó unos cuantos días hacerlo.
Se trata de unas hermosas pantuflas de dama, muy cómodas para estar en casa. En este tutorial les enseñaré a elaborarlas desde cero para que ustedes puedan recrearlas.
Para ello van a necesitar:


IMG_20240416_163944.jpg


  • Goma espuma de 4cm de grosor.
  • Suela tipo galleta.
  • Tela :puede ser en algodón, paño, en peluche o cualquier tipo de tela que sea suave más no tan elástica.
  • Hilo, aguja, tijeras.
  • Molde

IMG_20240416_161804.jpg


IMG_20240416_163934.jpg


Como primer paso vamos a sacar el molde y para ello utilizaremos unas cholas o sandalias de casa y la tomamos de patrón, luego lo cortamos en la tela deseada.


IMG_20240416_161716.jpg


De la parte de la plantilla se corta una de cada pie en tela, también en la goma espuma y poe último en la suela.


IMG_20240416_161618.jpg


De la parte de arriba que cubre el pie se corta
Una de forro, que en mi caso lo hice de la misma tela, también cortamos una de guata o goma espuma más delgada y se hace el mismo procedimiento para el otro pie.

Forramos la parte de arriba que cubre el pie, para ello se puede coser a mano con puntada festón o a máquina. Pero en esta ocasión decidí hacerla toda a mano.


IMG_20240416_161934.jpg


Luego de la parte del plataforma o plantilla, vamos a medir el contorno y sacamos dos tiras o sesgo de 3 cm ancho, y a esa medida se le suman 4 cm.


IMG_20240416_162018.jpg


De revés a derecho cosemos la tira o sesgo a la suela y cubrimos todo el contorno de la suela.
Cosemos la parte de arriba de la chola con la plantilla de tela cuadrando las mitad a lo largo y ancho.


IMG_20240416_161832.jpg


Luego colocamos la parte de la pantuflas unida a la plantilla de tela y cosemos dejando una abertura por donde se pueda voltear a la parte derecha.
Por la parte o abertura introducimos la goma espuma gruesa y la cosemos con costura escondida para que se vea con un buen acabado.


IMG_20240416_161533.jpg


El mismo procedimiento debemos hacer con la otra pantufla, es decir, repetimos el proceso, teniendo cuidado a la hora de hacer las medidas para que nos quede lo mas similar posible una a la otra.
El resultado de ellas me gustó mucho, quedan muy lindas, no se le ve la costura, son muy cómodas para estar en casa y además de todo son fáciles de hacer. Hasta aquí mi blog del dia de hoy, muchas gracias por llegar hasta aquí, les deseo que tengan un feliz día y noche.


IMG_20240416_163924.jpg


Hello my dear friends of Hive, happy Tuesday to all of you. Today I want to share with you a new project that took me a few days to make.
It is a beautiful slippers for ladies, very comfortable to be at home. In this tutorial I will show you how to make them from scratch so you can recreate them.
For this you will need:


IMG_20240416_163944.jpg


  • 4cm thick foam rubber.
  • Sole type cookie.
  • Fabric: it can be cotton, cloth, plush or any type of fabric that is soft but not so elastic.
  • Thread, needle, scissors.
  • Mold

IMG_20240416_161804.jpg


IMG_20240416_163934.jpg


As a first step we are going to take the mold and for this we will use some cholas or sandals from home and we take it as a pattern, then we cut it in the desired fabric.


IMG_20240416_161716.jpg


From the part of the insole is cut one of each foot in fabric, also in the foam rubber and finally in the sole.


IMG_20240416_161618.jpg


From the top part that covers the foot we cut out
A lining, which in my case I made from the same fabric, we also cut a thinner wadding or foam rubber and do the same procedure for the other foot.

We lined the top part that covers the foot, it can be sewn by hand with scallop stitch or by machine. But this time I decided to do it all by hand.


IMG_20240416_161934.jpg


Then from the part of the platform or template, we will measure the contour and take two strips or bias of 3 cm wide, and add 4 cm to that measure.


IMG_20240416_162018.jpg


From back to front we sew the strip or bias to the sole and cover the entire contour of the sole.
We sew the upper part of the chola with the fabric insole, squaring the halves lengthwise and widthwise.


IMG_20240416_161832.jpg


Then we place the part of the slippers attached to the fabric template and sew leaving an opening where it can be flipped to the right side.
Through the opening we introduce the thick foam rubber and we sew it with a hidden seam so that it looks with a good finish.


IMG_20240416_161533.jpg


The same procedure should be done with the other slipper, that is, we repeat the process, being careful when making the measurements so that they are as similar as possible to each other.
I really liked the result of them, they look very nice, you can't see the seam, they are very comfortable to wear at home and besides everything they are easy to make. So far my blog for today, thank you very much for coming this far, I wish you a happy day and night.


Pantuflas DIY_20240416_163246_0001.jpg


Fotos tomadas de mi teléfono Xiaomi Redmi Note 6 Pro || Photos taken from my Xiaomi Redmi Note 6 Pro phone.

Fuente del editor de imágenes || Image editor source

Traductor || Translator



0
0
0.000
10 comments
avatar

Hola @gabimramirez has hecho un trabajo muy bonito y delicado, la tela para el forro es preciosa, me gustan mucho este tipo de proyectos, las pantuflas no pueden faltar para relajarse porque son muy ligeras y suaves. Me encanta la idea de hacerme unas, ya que estoy usando todas las telas que tengo para aprovecharlas y deshacerme de muchos materiales que tengo guardados. Gracias por enseñarnos a hacerlos, que descanses bien.

Hi @gabimramirez you did a very nice and delicate work, the fabric for the lining is beautiful, I really like this kind of projects, the slippers can not miss to relax because they are so light and soft. I love the idea to make myself some, since I'm using all the fabrics I have to make the most of them and get rid of a lot of materials that I have saved. Thanks for showing us how to make them, have a good night's rest.

0
0
0.000
avatar

Hola Laura, definitivamente deben intentar hacer unas, la tela que se necesita es poca comparada a otros proyectos, me alegra que te haya gustado
Slaudos y feliz día

0
0
0.000
avatar

Hola @gabimramirez estas pantuflas te han quedado hermosas, lucen tiernas y delicadas, además se ven muy cómodas. Gracias por compartir. Saludos 🤗

0
0
0.000
avatar

Hola Katty, si, debo decir que es una tema hermosa y suave que queda perfecta para las pantuflas. Saludos y gracias linda

0
0
0.000
avatar

I like these kind of projects because they are really comfy
Following how you made it, it looks so nice and easy to make
I like the fact that I can’t even see the seam…

0
0
0.000
avatar

Hola linda, si, me gusta aplicar la costura escondida, siento que hace que los proyectos queden con mejor acabado. Gracias y saludos.

0
0
0.000
avatar

"Esto es realmente hermoso querida @gabimramirez. Es una chancla realmente cómoda que usaría con gusto en casa. Has hecho un trabajo increíble.".

!LUV !diy

0
0
0.000
avatar
@wongi just sent you a DIY token as a little appreciation for your post dear @gabimramirez! Feel free to multiply it by sending someone else !DIY in a comment :) You can do that x times a day depending on your balance so:

Don't be shy - share some DIY!

You can query your personal balance by !DIYSTATS

0
0
0.000