🎨 [Step by Step] - Tutorial: ✨ 🍉 🎊 Watermelon Shopkin Piñata "Melonie Pips" (all its measures included!) + PLUS: What happens if I don't want to break my piñata? 🎊 🍉 ✨ - By: @Tesmoforia.

avatar
(Edited)

"Talent is often expressed in the spontaneity of the unforeseen."

• "Vous Revoir" (2005), Marc Levy •


Gif-3-Opcion-1.gif

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2. Gif by the lovely @Vanuzza

Separador Rosa 2 Tesmoforia.png

In a previous note, some time ago, I mentioned that I started making custom piñatas; this is going really well actually! (considering that there are many families with young children where I live) 🎁 🐣 🎉

• • •

✨ This hobby became unexpectedly quite profitable! ✨

• • •

This tutorial is made with the registration of the first order I made (>uvu)> 🎨 💕, sadly, the photos don’t have much quality because this "Melonie Pips" piñata was made on a very cloudy and rainy day ☔


• S T E P • B Y • S T E P •
« Watermelon Shopkin Piñata "Melonie Pips" »

Separador Verde Tesmoforia 1.png

Pinata_Patilla_23.png

• SOURCE 1 ~ SOURCE •

Separador Verde Tesmoforia 2.png

The commissioned piñata was for a baby who turned her 1st year, so I looked for references among the franchises/toys that were trendy at the moment; and within the collection of the first "Shopkins" designs I chose the one that looked the most clean and sweet among them: 🍉 THE WATERMELON 🍉

But its original expression seemed quite ugly to me, so I looked for a template with different expressions of those characters so I could choose a more adorable one ~ 💝 👌


« T O O L S
&
M A T E R I A L S »

Separador Verde Tesmoforia 1.png

Pinata_Patilla_18.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Verde Tesmoforia 2.png

🍉 Silver Wires.🍉 Hot Glue Gun.
🍉 Scissors and Cutter.🍉 Gift tape (2,5 meters).
🍉 Pencil and Pen.🍉 Blue or green tissue paper.
🍉 Silicone bars.🍉 Large scissors and small scissors.
🍉 Ruler or Scale.🍉 Assorted colored crepe paper.
🍉 Red Cardboard.🍉 Pegamento escolar o cola blanca.
🍉 Gray Cardboard Sheets N° 22.🍉 Black Glitter Cardboard.
🍉 White Cardboard.🍉 Thick paper or recyclable thin cardboard.
🍉 Eraser and pencil sharpener.🍉 Large stapler and small stapler.

« STEP N° 1 »
• Body Construction •

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_1.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ Usually, I first make a paper pattern to be replicated in the final material, but for a matter of time, I drew the figure directly on the piñata cardboard.

✔ After that, when I was 100% happy with the drawing, I remarked the lines with a pen; then I erased the pencil lines, and I cut the first side.

👉 This first side will serve as a pattern to make the second side of the piñata 👈

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_5.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ Then, we take what will be the back side of the piñata, and we’ll draw a centered trapeze with the pencil, big enough to keep the toys inside the piñata (but not too much).

✔ We’ll cut 3 of its 4 sides with the cutter, and we will glue an inner cardboard tab in its narrowest side (top), this will avoid the "cap" to sink, and it’ll add resistance to the structure.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_4.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ The opening to fill the piñata must have this shape (and not the classic rectangle) to resist the weight in a better way when it’s full. It’s also advisable due aesthetic reasons 💅 🌈

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_2.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ We will calculate the length we need to cover the total contour of the piñata with the help of the ruler (although it is easier using a measuring tape).

✔ According to the measure we obtain, we will cut and fix the strips of cardboard.

✔ This "mega cardboard strip", must include 2 cm extra in its width with respect to the measure that we have chosen for the depth of the piñata, and a minimum of 4 cm extra in its length.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_3.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ We will mark 2 lines of 1 cm from each of the margins of the "mega cardboard strip", and we will make many small cuts between 1 cm to 1.5 cm wide.

✔ Those cuts will serve to make little tabs, that we must fold to the inner side of the cardboard.

👉 The function of these tabs is to facilitate the adhesion of the contour of the piñata to their faces, preserving the curves in the design. 👈

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_6.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

The first side to be installed is the back, because its opening is the weakest.

✔ For that, we will delicately place a bit of glue around the outer border of the cardboard side, and a little more of glue in the inner side of the tabs; we will wait 3 minutes before starting to join them together.

... And now ~

✨ 🎨 💡 IS TIME FOR THE PLUS 💡 ✨ 🎨

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_7.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ Before installing the second side, we will stroke again with a pencil and ruler a rectangle at the bottom of the margin/wall of the piñata, and cut with the help of the cutter.

✔ The inner edges of this rectangle are reinforced with cardboard strips, some glue and staples.


Separador Rosa 1 Tesmoforia.png

Gif-Patillosito-1.gif

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png


Piñata_Patilla_00.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

The "Melonie Pips" Shape is very simple and clean; once the 3 pieces are assembled, the complete figure will be very stable and will stand on its own 💯 👍

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_8.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ With school glue, we will glue tabs of recycled thick paper on the edges of both sides for extra resistance.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_20.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

👆 Including some at the bottom 👆

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_10.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ With the silver wire and the gripper, we will create a hook like the one in the photos, and we will install it through the top of the piñata.

✔ Above, and to avoid it from moving loosely, we put a cardboard rectangle with a lot of glue and staples.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_11.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ For greater resistance, the previous step is repeated but only with glue (for aesthetic reasons).


« STEP N° 2 »
• Little Fuzzy Paper Layers •

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_21.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

The installation of the paper must always be from the bottom up, with the layers being very close and with little glue so as not to damage the upper layers.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_12.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ Those paper layers can be made cutting rolls of crepe paper of about 4 cm width, trying that the cuts are really close, leaving a line of more than 1,5 cm intact, and should be unrolled very carefully.


Separador Rosa 1 Tesmoforia.png

Gif-Patillosito-2.gif

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png


Pinata_Patilla_13.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ For a more colorful effect, I used 2 different hues of fucsia, and 2 different hues of green, alternating colored paper strips between each layer.

✔ It is necessary to leave paperless places where the biggest details of cardboard go.


« STEP N° 3 »
• Cardboard Details •

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_14.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ For the eyes and seedlings, I drew an initial pattern freehand on regular paper. Then I used those patterns as a template and transferred the design to the black glitter cardboard.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_15.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ For the blue circles (the irises), I lined a white cardboard disc with tissue paper, so that there was harmony in the transition of materials (I don’t like foamy nor the appearance of the painted cardboard).

✔ The eyes are composed of 4 parts: The base with eyelashes, the light blue iris, the black center, and a small white circle as a shine.


« STEP N° 4 »
• In case you don't want to kill the Watermelon... •

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_17.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

✔ To seal the bottom, we will cut 2 large rectangles of brown crepe paper. In the first one, we will staple the gift tape throughout its center, letting it get out from the opposite side just in the line that borders the inner edge of cardboard.

✔ The second layer is to reinforce the first one and support the weight of toys/candies when filled.

Separador Rosa 1 Tesmoforia.png

Pinata_Patilla_22.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

Separador Rosa 2 Tesmoforia.png

👇 The rectangle at the bottom of the piñata serves 2 functions 👇

a) The first one, it’s to be an alternative in case the Birthday kid doesn’t want to break the piñata (this happens more times than you can imagine), then, they would be able to pull from the tape attached to the paper to open the piñata and free all the toys (and save it from the horrible murder hahaha) 🔨 💀 💦

b) The second one, is to offer a gentle alternative to smaller kids who don’t have enough force yet or enough dexterity to break the piñata alone, on this case, the end of the tape is offered to the little one, who can tear the paper with little effort 💪 👶 🎈


« R E S U L T »

Separador Verde Tesmoforia 1.png

Pinata_Patilla_19.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Separador Verde Tesmoforia 2.png

The color looks different from photo to photo because the natural light besides being so little, it was very changing throughout the afternoon.

Separador Verde Tesmoforia 1.png

Pinata_Patilla_16.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Separador Verde Tesmoforia 2.png

The colors of this piñata are much prettier in person, especially the iridescence of the glitter eyes and the little seeds.



« Piñata Measures »

Piñata_Patilla_Terminada_Por_Tesmoforia.png

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

• Complete Measures •

• • •

• Width:
• Length:
✨ 42cm ✨
✨ 45 cm ✨

• • •

• Specific Measures •

• • •

✔ Red Part Height: 39,5 cm.✔ From the little arm to the top of the watermelon: 27,5 cm.
✔ Green Part Height: 6 cm.✔ Each half of the Watermelon: 21 cm.
✔ Feet Height: 3 cm.✔ The final curve of the Watermelon is: 4 cm (2 cm for each side).
✔ Arms Height: 5,5 cm.✔ Piñata Depth: 10 cm.
✔ Arms Width: 5 cm.✔Hook Height: 7 cm.
✔ Each little finger Height: 4,5 cm.✔ Lenght of the Mouth: 7 cm.
✔From bottom to top distance to the little arm: 16 cm.


🎀 A Happy Ending! 🎀

• • •

• X X X •

• • •

I must add that, at the end, the baby’s parents loved the piñata so much they decided to keep it and they have it now as decoration at one of their oldest daughters’ bedrooms.

A lot of water ran beneath the bridge since May (you can see the date when the photos were taken in the notes above), but I could finally write this tutorial today.

I confess that I don't understand the love for these dolls, but this "LOL Dolls" and "Shopkins" fever is really strong, every little girl wants their Birthdays with those things’ thematic ó_ó;;

Maybe I was born at the SANRIO stage, so I prefer the "minimalist cute" designs in 2D, flats, and without exaggerations, but oh well, the client has the leading! ~



discordia (1).png Discord discordia (1).png
Tesmoforia#8715
cat.png Would you like to ask me anything? cat.png
CURIOUS CAT
drugs.png Do you play Drugwars? drugs.png
DRUGWARS


needle.png bitcoins (1).png Would you like to Support me? You can help me get more and better supplies to continue Crafting! bitcoins (1).png needle.png


🔵 Byteball 🔵
0WGZQTPP52RXWPX2GQMR4IHWLQTQOKHJR

🔹 🔸 🔷 BTC (Binance) 🔷 🔸 🔹
🔹 🔸 🔷 ETH (Binance) 🔷 🔸 🔹
Binance BTC Dirección.png
17Si4zqHs3QvgaQ3rAxyEiVrVjVgcywz1X
Binance ETH Dirección.png
0xbc618c5058719e67114d116355605b567645d28c
🔹 🔸 🔷 EOS (Binance) 🔷 🔸 🔹
🔹 🔸 🔷 DOGE (Binance) 🔷 🔸 🔹
qrcode (1).png
binancecleos / MEMO 101398420
qrcode (2).png
D5KZjvuhTrQhPwnTwbvaQmixD33vtoJNmr


Thank you so much for Reading!

✨ 🍓 ✨ Happy, Soft and Creative Day to All ✨ 🍓 ✨

✨ 🍃 ✨

Tesmoforia_2018_Colores.gif

🍓 Text and All Images’ Credit: @Tesmoforia 🍓
🍓 Translation: @Vanuzza 🍓
🚨 Please don’t take, edit or re-post my content without my permission! 🚨
💌 Would you like to get in contact with me? [email protected] 💌
✨ Separators: @Vanuzza • Gif´s: Giphy.com ~



Twitter - Tesmoforia.png Pinterest - Tesmoforia.png Instagram - Tesmoforia.png Facebook - Tesmoforia.png


commented.png comments.png payout.png posts.png voted.png votes.png


The separators and icons used in this post ARE NOT FREE TO USE, the Designer User @Vanuzza created them for me; and they are protected by Copyright, that’s to say, they can’t be taken neither used by third-parties. Please respect the property of other content authors and creators. Thank you.


⚜ All Rights Reserved / © T E S M O F O R I A - 2018/2019 ⚜

tipping.me tesmoforia.jpg
taco.png I like Tacos! taco.png
Ko Fi Tesmoforia.png
coffee-mug (1).png And Coffee too! coffee-mug (1).png



0
0
0.000
4 comments
avatar

Hello!

This post has been manually curated, resteemed
and gifted with some virtually delicious cake
from the @helpiecake curation team!

Much love to you from all of us at @helpie!
Keep up the great work!


helpiecake

Manually curated by @veryspider.


@helpie is a Community Witness.
For more information about our project,
please visit this month’s UPDATE post.

0
0
0.000
avatar

You motivate me to be better o//)-//ó 🍓 🎀

I hope everyone has a beautiful Sunday! ☕ ✨

0
0
0.000