Hello everyone... ♦️♠️♥️♣️

Hello my dear Hiver and the dear community of artists #Jewelry, as always very pleased and excited to be here again, showing you my work made with love and especially for you.


For today I bring you a somewhat curious work, different and how did the idea came up? it was in a funny way, sometimes I usually ask at home give me ideas of something I can do in quilling, they tell me a couple of things and from there I start to do something, this time I was at the end of a discord activity talking to say goodbye with @frankches and @karelysk89 who were the ones left, and just as I do at home I asked them, Karelys told me a couple of things but they were a little complicated, and Frankches mentioned some poker cards, and I said that seems attractive to me, let's see what I get from there, I proceeded to look for some cards at home and then I started to materialize the idea.


That is why today I bring you a set of earrings and a bracelet with 4 pendant charms, with poker symbols made in the quilling technique.


I hope you like it here I leave you the creative process.


Thanks a lot Frankches for the idea, you are a sun.🌞

Let's get started: ♦️♠️♥️♣️😃

Hola a todos... ♦️♠️♥️♣️

Hola a mis queridos Hiver y a la querida comunidad de artistas #Jewelry, como siempre muy complacida y emocionada de encontrarme por acá nuevamente, mostrándole mi trabajo hecho con mucho amor y especialmente para ustedes.


Para hoy les traigo un trabajo algo curioso, diferente y ¿Cómo surgió la idea?, fue de una manera graciosa, yo suelo a veces preguntar en casa denme ideas de algo que pueda hacer en quilling, me dicen un par de cosas y de allí parto a realizar algo, esta vez me encontraba al finalizar una actividad de discord conversando para despedirnos con @frankches y @karelysk89 que éramos los que quedábamos, y tal cual como hago en casa les pregunte, denme ideas de que pueda hacer en quilling, Karelys me dijo un par de cosas pero eran algo complicadas más a delante veo que saco de ellas, y Frankches me menciono unos naipes de póker, y dije eso me parece atractivo vamos a ver que saco de allí, procedí a buscar unas cartas en casa y pues empecé a materializar la idea.


Es por esto que para el día de hoy les traigo un conjunto de zarcillos y una pulsera con 4 dijes colgantes, con los símbolos de póker realizados en la técnica de quilling.


Esperando sea de su agrado por acá les dejo el proceso creativo.


Mil gracias Frankches por la idea, eres un sol.🌞

Comencemos:♦️♠️♥️♣️😃

To make the clover symbol charm: ♣️

• We take 3 pieces of black quilling ribbon 3mm wide x 12cms long, with the quilling needle we roll until we reach the end of the ribbon, we take out and place on the ruler with different measures of circumferences in the circle number 6, we take out of the ruler and seal with a point of extra strong white glue, we will obtain an open circle. Repeat the process with the two remaining ribbons, set aside.
  
  
• We take another piece of black ribbon 3mm wide x 6cms long, we make another open circle, this one we also measure in the circle number 6 of the ruler.
  
  
• Once the 4 circles are ready, we are going to mold, we start with the first 3 circles, we are going to pinch their ends and form a leaf or drop, with the remaining circle we will pinch its three ends to form a kind of triangle shape.
  
  
• We are going to form the pendant, we take the three leaves and glue them together harmoniously as shown in the image and finally we take the other piece and glue it at the bottom, in this way we will have the clover formed.
  
  
• To decorate the pendant I put a small crystal in the center of the clover in this way we give it more showiness, and to advance while I make my other pendants I decided to put the liquid protection, with a brush we put several layers of extra strong white glue evenly on all sides of the piece, letting it dry between one layer and another. Set aside.
  
  

Para realizar el dije con el símbolo del trébol: ♣️

• Tomamos 3 trozos de cinta de quilling negra de 3mm de ancho x 12cms de largo, con la aguja para quilling enrollamos hasta llegar al final de la cinta, sacamos y colocamos en la regla con diferentes medidas de circunferencias en el círculo número 6, sacamos de la regla y sellamos con un punto de pega blanca extra fuerte, vamos a obtener un circulo abierto. Repetimos el proceso con las dos cintas restantes, reservamos.


• Tomamos otro trozo de cinta negra de 3mm de ancho x 6cms de largo, realizamos otro circulo abierto este también lo medimos en el círculo número 6 de la regla.


• Listos los 4 círculos, vamos a moldear, comenzamos con los primeros 3 círculos, vamos a pellizcar sus puntas y formar una hoja o gota, con el circulo restante pellizcaremos en sus tres extremos para formar una especie de triangulo con forma.


• Vamos a formar el dije, tomamos las tres hojas las unimos con pega de manera armónica como lo indica en la imagen y para finalizar tomamos la otra pieza y la pegamos en la parte de abajo, de esta manera tendremos el trébol formado.


• Para decorar le coloque al dije un pequeño cristal en el centro del trébol de esta manera le damos mayor vistosidad, y para adelantar mientras hago mis otros dijes decidí ponerle la protección liquida, con un pincel le colocamos a la pieza varias capas de pega blanca extra fuerte de manera uniforme por todos sus lados, dejando secar entre una capa y otra. Reservamos.

To make the charms with heart symbols: ♠️♥️

• We are going to take 2 pieces of black ribbon and two pieces of red ribbon 3mm wide x 12cms long, with the quilling needle we roll until we reach the end of the ribbon, we take out and place on the ruler with different measures of circumferences in the circle number 8, we take out of the ruler and seal with a point of extra strong white glue, we are going to get an open circle. Repeat the process with the remaining black and red ribbons, set aside.
  
  
• Once the 4 open circles are ready, we are going to mold them in the shape of a leaf.
  
  
• For the black heart we will need another triangular piece like the one we made for the clover, you can see the process above. In addition to this we will need a small round piece for the red heart, made with a small piece of ribbon rolled with the needle, this small piece will be to place the ring in the heart.
  
  
• Ready the pieces we are going to form the heart symbols, for the black heart we glue the pieces that we molded as leaves next to each other and on the top we place the small triangular piece.
  
  
• For the red heart we repeat the previous process and glue the small circular piece on top.
  
  
• Once the hearts are ready, we decorate them with a crystal in the center and place the liquid protection.
  
  
• To the red heart before adding more layers of glue I placed a costume jewelry ring on top and underneath the piece.

Para realizar los dijes con símbolos de corazón: ♠️♥️

• Vamos a tomar 2 trozos de cinta negra y dos trozos de cinta roja de 3mm de ancho x 12cms de largo, con la aguja para quilling enrollamos hasta llegar al final de la cinta, sacamos y colocamos en la regla con diferentes medidas de circunferencias en el círculo número 8, sacamos de la regla y sellamos con un punto de pega blanca extra fuerte, vamos a obtener un circulo abierto. Repetimos el proceso con las cintas restantes negras y rojas, reservamos.


• Listos los 4 círculos abiertos vamos a moldear de forma de hoja.


• Para el corazón negro vamos a necesitar otra piecita triangular como la que hicimos para el trébol, pueden ver el proceso de elaboración en la parte de arriba. Adicional a esto vamos a necesitar una pequeña pieza redonda para el corazón rojo, realizada con un trocito de cinta enrollado con la aguja, esta piecita será para colocar la argolla en el corazón.


• Listas las piezas vamos a formar los símbolos de corazón, para el corazón negro pegamos las piezas que moldeamos como hojas uno al lado de la otra y en la parte de arriba le colocamos la pequeña pieza triangular.


• Para el corazón rojo repetimos el proceso anterior y le pegamos la pequeña pieza circular en la parte de arriba.


• Listos los corazones adornamos con un cristal en el centro y colocamos la protección liquida.


• Al corazón rojo antes de agregar mas capas de pega le coloque una argolla de bisutería arriba y debajo de la pieza.

To make the pendant with the diamond symbol: ♦️

• We take a red quilling ribbon 3mm wide x 50cms long, we roll with the quilling needle, we measure on the circumference ruler in the circle number 10.
  
  
• Ready our circle we are going to give it a diamond shape pinching with the help of the fingers, the four sides of the circle.
  
  
• Place a crystal in the center of the diamond to decorate it and before placing the liquid protection, place a jewelry ring above and below it, then proceed to place the glue to protect it.
  
  
• We already have the pieces ready and dry, we will assemble our hanging tendrils, to the hook I will place to decorate a black pearl and a red one in this way it will stand out and will have greater detail and showiness, then we will hook the black heart of the ring that I previously placed to the diamond in the part of below, and in the same way we will do with the clover we will hook it of the ring that has placed the heart, as it indicates the image there you will see it more clearly.
  
  
  In this way we have these curious tendrils with card symbols ready for use.
  
  
  Any pendant that we elaborate we can give the use that we want, I got several bracelets to which some pendant charms had fallen and I decided to make the four charms of cards, I put a ring on the top and the four I put them to the bracelet, we can adapt our creations to what we want everything is to let our imagination fly.

To make the pendant with the diamond symbol: ♦️

• We take a red quilling ribbon 3mm wide x 50cms long, we roll with the quilling needle, we measure on the circumference ruler in the circle number 10.
  
  
• Ready our circle we are going to give it a diamond shape pinching with the help of the fingers, the four sides of the circle.
  
  
• Place a crystal in the center of the diamond to decorate it and before placing the liquid protection, place a jewelry ring above and below it, then proceed to place the glue to protect it.
  
  
• We already have the pieces ready and dry, we will assemble our hanging tendrils, to the hook I will place to decorate a black pearl and a red one in this way it will stand out and will have greater detail and showiness, then we will hook the black heart of the ring that I previously placed to the diamond in the part of below, and in the same way we will do with the clover we will hook it of the ring that has placed the heart, as it indicates the image there you will see it more clearly.
  
  

In this way we have these curious tendrils with card symbols ready for use.


Any pendant that we elaborate we can give the use that we want, I got several bracelets to which some pendant charms had fallen and I decided to make the four charms of cards, I put a ring on the top and the four I put them to the bracelet, we can adapt our creations to what we want everything is to let our imagination fly.

What did you think, did you like it?

I hope you did, I hope you liked my explanation, procedure and photos, I made them with love for you.

"Let out that muse that inspires you, and let your imagination fly".

Thank you all, see you next time. 🐾🐱💕

¿Que les pareció, les gustó?

Espero que sí, que les haya gustado mi explicación, procedimiento y fotos, los hice con mucho cariño por y para ustedes.

"Deja salir esa musa que te inspira, y deja volar tu imaginación".

Gracias a todos, nos vemos en la próxima. 🐾🐱💕

Vote la-colmena for witness By @ylich

Todas las fotos usadas en este post son de mi autoría y han sido sacadas en mi celular personal un Redmi 9T y editadas Canva

Banner y separador hecho por mí en Canva

Traducido con la ayuda de DeepL