Boys and Their Toys - Milwaukee M18 Compact Router

avatar

Just like a little kid during Christmas... I am excited for new toys too!! Big Kid toys that is. Unfortunately I had to return my 10 inch table saw with stand that my Awesome Wife and incredible kids got me. Hey, it didn’t have the wheels on the stand and the one with the wheels is the same price. Can you blame me?? You can fold it up and wheel it along, instead of packing it around. Anyway, when I was returning that table saw and ordering the other one, I decided to take my stack of gift cards and do a little shopping for myself. Now I am a huge fan of what Milwaukee tools has been doing lately. They have really been stepping up their game in the past 5 or so years. I have been blown away with their cordless tools and just couldn’t help but add one to my tool box. I was really considering giving my Dad the okee-doke and running out the door with his new 10 tool Milwaukee set buuuutt I’m sure that wouldn’t turn out good. Trust me that old man still had it even at 70. 😉. So instead I used that stack of gift cards and picked up the...

Milwaukee M18 Compact Router
CD9D28284F82421690E98372775AA807.jpeg

The tool itself weighs nothing! So at a price tag of $200 you really don’t feel like you are getting much. Especially since this price is for the tool only. No battery or charger. Them dang batteries are $150 a piece!!! Got Dang!!! Thank goodness I have a charger and 8 amp hour battery from the weed eater I purchased last year. I could use at least one more battery though... Anyway...

The majority of the tool weight is in the battery that mounts on the top. At full speed this tool is amazingly quiet. I remember the big routers I used to use when I was framing houses, you needed ear plugs for Christ’s sake. Then babies were loud. Then again that was back in the early 2000’s

I purchased a 1/2 diameter bit used for rounding the edges of a woodworking project. I have a picnic table on the deck which would work for perfect testing ground for this tool. So let’s give this baby a try on one of the seats.

Before
A5A93ADD0E2540D39DA826B510215F4E.jpeg
After
7884A0D5FC444829B8E9A0C2A1292DC9.jpeg

Talk about effortless!! Just gently push the router along and keep the deck flat on the work piece. Easy Peasy... One thing that happened is as I went along I noticed a ridge developing where the router bit had been extended past the deck.

C08955E3E0494B1AB799A26E88E8BD4B.jpeg

The end of the cutting blade needs to stay flush with the deck of the router to prevent that edge or lip from being cut in. Now if you want that edge then extend the bit further.

3B932220B40A425CA828C9CA203F0497.jpeg

What happened was the the cam-over lock for the adjustment of the deck wasn’t tight enough. The gentle vibration of the tool along with a little down pressure caused the deck to retract. The deck has a wheel that can be turned by your thumb for a very fine tuning the adjustment, but if I put any weight on the battery it would push the cutting bit deeper into the wood piece. The clamp just wasn’t tight enough. So a minor adjustment with an Allen wrench and this shouldn’t happen anymore.

D3D4525692664DF29C4C12DFDACB5759.jpeg

After righting that down a bit I went ahead and did the whole table because... Now that I started I can’t stop...

Before
D80642EE64B64F70AACDC71A6B2596E5.jpeg
After
462A181758884AAC8CFFE2C6B86049E5.jpeg

Granted this table would have turned out a lot better if the pieces were done before making it into the table. You can really tell at the ends of the boards. If one is slightly higher than the other is makes that nice rounded edge all jacked up. Hence the reason this is a test piece.

60028EF44BF4499087B925EBD311382A.jpeg

It only took about 10 minutes to do the whole table... if that. Eventually I will sand it down and give it a good stain to make it look nice.... eventually...

I am really excited to start accumulating more router bits and I really want to make a router table for this little guy. I have seen people make them with the larger routers, so why not one for the little guy?? The little guy always gets left out... The bits are a little spendy, especially for the good ones but it is well worth it to me. Having this tool in my tool box, along with that table saw, should make woodworking projects that much nicer and that much easier. Stay tuned because I have some ideas in mind for this router...


2D7B99B38B2C4D538FEC28775B55F192.jpeg

9730FF78B35142D89349809F353FBB53.png

Your Random
Dose of...

Join us in the Mancave!



0
0
0.000
4 comments
avatar

Congratulations @splatts! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You got more than 400 replies. Your next target is to reach 500 replies.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @hivebuzz:

First Hive Power Up Day of 2021 - Get a Hive Power delegation
Offer a gift to your friends for Christmas
0
0
0.000
avatar

A great addition, having the right tool for any job is always a pleasure.
You mentioned that you will be getting some different bits for the router.
Some bits that I find to be fun to use are plunge bits.
I use them to make different signs. The router I have has an attachment that can be added and it allows one to plunge the bit into the wood and then scribe letters, designs, or anything you fancy. After completing each letter, you just take some downward pressure off of the router and it lifts the router away from the surface of the wood. It
It's a great attachment and makes plunge bits more versatile.

IMG_4154.JPG

The plunge attachment can be removed in seconds, and you're back to a regular router.

0
0
0.000
avatar

That plunge deck is gonna be my next purchase. I really want to find a way to be able to attach it into a table for a router table. I know I have seen someone make one somewhere?? Great now I gotta search it...

0
0
0.000
avatar

Making a router table sounds like another DIY project.

0
0
0.000