HOW I FIXED A MIXER STANDING SHOWER WITH A HANGER,SHOWER ROSE,HAND SHOWER ETC
This is how I fix a mixer standing shower. Though we have a lot shower pattern but it depends on the customers tastes and choices. But to say the least , it is not that expensive but when it's fixed it's very beautiful.
STEP BY STEP ON HOW I FIX THE MIXER STANDING SHOWER.
The first thing to do before you can fix this kind of shower is that as an engineer the wall must have been a finished one because it's not advisable to fix the shower when the wall is half done.
FIRST STEP
The first step is to fixed the mixer shower as you can see in the picture above.. The mixer shower must be straight and neat to get a good end result.
SECOND STEP
The next thing to do is to fixed the hanger of the shower pole. Before fixing the hanger of the pole,I have to take a measurement from the mixer shower that has already been fixed to the hanger to avoid bad results when fixing the pole e.g inaccurate results,bent pole etc.
STEP 3
After I have fixed the hanger perfectly, then the next thing is to fixed the shower pole to the mixer shower and then attached the shower pole to the hanger on the wall.
STEP 4
After fixing the shower pole to the mixer shower and attached the pole to the hanger on the wall, the next thing is to screw the pole with the hanger to avoid the pole shaking or losing balance. But before screwing the shower pole to the hanger I make sure that the pole is straight because gradually am getting close to the end product.
STEP 5
After you must have fixed the mixer and shower pole perfectly, then the next is thing is to fixed the hand shower to the shower cable and connect it to the mixer shower. After that, the hand shower can be placed on its hanger. Then you're good to go
I @twicejoy wanna thank you all for stopping by to view my post.