How to fly a Drone? Meet the RC [ESP] ¿Cómo volar un Drone? Conoce el RC

avatar

Knowing in depth that device that allows you to do everything with your drone is basic. The movements in the command are transmitted by radio and when received by the ship, it responds to the orders, these radio signals sent are key and give life to the dream of flying.


Link

These transmitters come in different presentations and characteristics, attached to each stick or lever are leveling buttons called "TRIM", these are used to balance the drone, its pitch and slide. To make this adjustment it is necessary that we fly as a test in a clear place and low altitude, this to be able to balance the drone and while we carry out this work and that when moving an accident does not occur.

These buttons should be used when you take off with your drone and you notice that it automatically tilts towards one of the sides, you can correct this inclination by pressing the TRIM buttons opposite to the inclination movement presented by the drone.

After correcting these characteristics and you can notice that the drone remains in one position, it is time to continue and move on to the next step, which is FLYRRRRR !!!


ESPAÑOL


Conocer a fondo ese aparato que te permite realizar todo con tu dron es básico. Los movimientos en el mando se transmiten por radio y al ser recibido por la nave, esta responde a las órdenes, estas señales de radio enviadas son clave y dan vida al sueño de volar.


Link

Estos mandos transmisores vienen en distintas presentaciones y características, adjunto a cada stick o palanca vienen unos botones de nivelación llamados "TRIM", estos sirven para balancear el drone, su cabeceo y deslizamiento. Para realizar este ajuste es necesario que volemos a modo de prueba en un lugar despejado y a poca altura, esto para poder balancear el dron y mientras realizamos este trabajo y que al desplazarse no ocurra un accidente.

Estos botones debes utilizarlos cuando despegas con tu dron y notas que el mismo se inclina de manera automática hacia uno de los lados, puedes corregir esa inclinación pulsando los botones TRIM contrarios al movimiento de inclinación que presenta el dron.

Después de corregir estas característica y puedes notar que el dron se mantiene en una posición es el momento de continuar y pasar al siguiente paso que es VOLARRRRRR!!!

Gracias por pasar.



0
0
0.000
0 comments