Thanos Sculpture (Sculpture#3) / Escultura de Thanos (Escultura #3)

avatar
(Edited)

(The English version is below)

*****Versión en español*****

Llegué a esta comunidad mientras buscaba un lugar en el cual publicar mis esculturas. Ya había publicado otra escultura aquí en HIVE, pero lo había hecho para un concurso de @discovery-it, así que no había investigado otro tipo de comunidades orientadas a esta temática.

Pueden ver la primera escultura que publiqué en HIVE siguiendo este enlace:
https://peakd.com/hive-193212/@gaboamc2393/por-que-me-gusta-discovery-it-mi-escultura-because-i-like-discovery-it-my-sculpture

Al ver que HiveDiy era una comunidad apropiada para mi trabajo, decidí publicar aquí la última figura que había hecho, un anciano leyendo un diario, o un periódico.

Pueden ver esa figura siguiendo este enlace:
https://peakd.com/hive-130560/@gaboamc2393/sculpture-2-oldman-reading-escultura-senor-leyendo

Mientras hacía el post antes mencionado, me enteré del "Moldable world contest", el primer concurso de esta maravillosa comunidad, según leí. Me pareció perfecto y sabía que debía participar, incluso @equipodelta me invitó a hacerlo.

Puedes leer más sobre el concurso siguiendo este enlace:
https://peakd.com/hive-130560/@hive-130560/moldable-world-contest-with-hivediy-esp-eng

Con esto en mente, puse manos a la obra y comencé a idear mi participación en el concurso. Desde hace un tiempo tenía planeado hacer esta figura, así que me pareció perfecto presentarla para este concurso. Dicho todo esto, les presento entonces a mi escultura de Thanos...

Esta escultura es una representación de Thanos, así que no es exactamente igual a las versiones del personaje, ya sea en cine, series o comics; aunque sí me fijé bastante en la versión cinematográfica para hacer esta escultura.

Materiales utilizados:

  • Plastilina
  • Alambre
  • Papel
  • Cinta adhesiva

Si se me escapa algún material, lo iré mencionando a lo largo de la publicación. Dicho todo esto, comencemos.

Lo primero que hay que hacer para el modelado de este tipo de esculturas, es el esqueleto. La plastilina es un material muy débil, así que hay que hacerle un esqueleto para que la figura mantenga su forma. Sin embargo, para este caso en particular yo comencé con la cabeza, ya que me parecía un poco complicado hacer el rostro; aún así, logré un resultado decente, tal como se muestra en la imagen a continuación:

Debo confesar que durante el moldeado de la cara me concentré tanto que olvidé tomar fotos a una parte del proceso, por eso se evidencia un salto de pasos entre la imagen 5 y 6, siendo que en esta última se aprecia la cabeza de la escultura fijada sobre el esqueleto de alambre. Dicho esto, sigamos...

En la imagen que acaban de ver, se distingue claramente los materiales utilizados para el esqueleto, alambre, papel y cinta adhesiva. El papel se usa para rellenar el esqueleto, como si fuese músculo; la cinta adhesiva se usa para mantener fijo el papel, para cubrirlo después con la plastilina. Ese es el paso siguiente, comenzar a cubrir el esqueleto con plastilina; comencé con la parte inferior:

En la imagen se observa como cubrí con color marrón, para luego moldear hasta lograr la forma deseada. Me ayudé con un palillo para continuar moldeando y dar forma a los pliegues del pantalón, tal como se ve en la siguiente imagen:

Tras terminar con el pantalón de la figura, comencé a trabajar con las botas:

Aquí tuve que mezclar plastilina naranja, marrón y amarilla para obtener un color parecido al dorado, el cual usé para las botas y otros accesorios. Me ayudé con un palillo y una herramienta de modelado para dar forma a la bota. Una bota primero y otra después:

Lo siguiente fue las rodilleras. Estas las hice con plastilina "dorada" y azul oscuro (solo mezclar azul con un poco de negro). Quedó tal como se aprecia en la siguiente imagen:

Una vez terminada la parte inferior de la figura, seguí con la parte superior. Para ello cubrí el torso con plastilina azul oscuro y moldeé hasta lograr la forma deseada:

En esta parte hice una pausa en el torso y me concentré en los brazos, ya que cubrí el torso con plastilina azul solamente para definir la forma que tendría la figura. Hecho esto, cubrí primeramente el brazo izquierdo con plastilina morada y luego moldeé hasta lograr la forma deseada, tal como se aprecia en la siguiente imagen:

Con una aguja hice los detalles del brazo izquierdo (22), luego seguí con el brazo derecho (23) y moldeé hasta lograr la forma deseada (24 y 25):

Para hacer la mano del brazo derecho simplemente coloqué una pelotita de plastilina en el antebrazo y la aplasté (26), luego coloqué cada dedo uno por uno, ayudándome con una aguja para suavizar la unión entre la mano y cada dedo (27).

Como muchos recordarán, Thanos tiene un guante en su mano izquierda, así que al terminar la mano derecha, toca hacer el guante. Lo primero que hice para esto fue hacer una suerte de muñón en el antebrazo (28), sobre este coloqué el cuerpo del guante (29), valiéndome de una aguja para hacer los más mínimos detalles (29 y 30). Por último, coloqué lo que sería la mano sin sus dedos (31).

Para hacer este guante hay que tener paciencia, esa es la clave. Sino me crees, mira los siguientes pasos: colocar el pulgar y una cubierta encima de la mano que habíamos puesto antes (32); hacer un orificio para cada dedo en dicha cubierta (33); modelar el dedo índice, hacerle los detalles con una aguja y colocarlo en el lugar correspondiente(34), modelar el dedo medio, hacerle los detalles con una aguja y colocarlo en el lugar correspondiente(35), modelar el dedo anular, hacerle los detalles con una aguja y colocarlo en el lugar correspondiente(36), modelar el dedo meñique, hacerle los detalles con una aguja y colocarlo en el lugar correspondiente(37). Esto no termina aquí...

Con una aguja hice los detalles en la cubierta del guante, coloqué orificios para las seis gemas (38) y coloqué cada gema en su respectivo lugar (39).

Un paréntesis acá, mi prima me quería ayudar a hacer las gemas, así que ahí está, haciendo las pequeñas gemas que luego le colocaría a Thanos en el guante:

Seguimos. Una vez listo nuestro guante, volvemos con el pecho. Me ayudé con una aguja para dar forma a todos los pliegues de la ropa hasta obtener el resultado deseado. También usé una tira de plastilina dorada y marrón para hacerle un cinturón. Luego lo arreglaría con mayor detalle, solo era para tener una referencia de en donde quedaría el cinturón.

Use más plastilina dorada para la placa del pecho (41) y plastilina marrón para placas de los hombros (42).

Usé la misma plastilina marrón para detalles de la espalda (43) y plastilina dorada para placas de la espalda (44). Finalmente me ayudé con una aguja para dar forma a los pliegues de la ropa (45).

Ya en este momento la figura tiene forma de Thanos, como se aprecia en la imagen de abajo. Aquí me salté unos pasos porque no tomé fotos, pero prácticamente lo que hice fue terminar el cinturón, colocar un par de pliegues con plastilina azul y unos cuantos trozos de "tela" que cuelga de la parte azul del uniforme de Thanos.

En el área frontal terminé detalles de la placa dorada y el torso.

Finalmente arreglé el cinturón e hice detalles en los zapatos con una aguja. También di forma de césped a la base verde de la figura.

Y de esta manera está terminada mi escultura de Thanos. Los dejo con las fotos que tomé desde distintos ángulos.

Bien, espero que la escultura les haya gustado, pues la intención era la de presentar algo de calidad para el concurso. Gracias a la comunidad de HiveDiy por la oportunidad de poder participar en este maravilloso concurso y por el buen recibimiento. Si gustan dejar sus opiniones, con gusto pueden hacerlo en los comentarios, yo estaré encantado de leerles. Sin más que agregar, me despido entonces...

¡Hasta la próxima!



*****English version*****

I came to this community while looking for a place to post my sculptures. I had already posted another sculpture here on HIVE, but I had done it for a @discovery-it contest, so I hadn't researched other types of communities geared towards this theme.

You can see the first sculpture I published in HIVE by following this link:
https://peakd.com/hive-193212/@gaboamc2393/por-que-me-gusta-discovery-it-mi-escultura-because-i-like-discovery-it-my-sculpture

Seeing that HiveDiy was an appropriate community for my work, I decided to post here the last figure I had made, an old man reading a newspaper.

You can see this figure by following this link:
https://peakd.com/hive-130560/@gaboamc2393/sculpture-2-oldman-reading-escultura-senor-leyendo

While I was making the above mentioned post, I found out about the "Moldable world contest", the first contest of this wonderful community, as I read. It sounded perfect to me and I knew I had to participate, even @equipodelta invited me to do so.

You can read more about the contest by following this link:
https://peakd.com/hive-130560/@hive-130560/moldable-world-contest-with-hivediy-esp-eng

With this in mind, I got down to work and began to devise my entry for the contest. I had been planning on making this figure for a while now, so it seemed perfect to submit it for this contest. With all that said, I present to you then my Thanos sculpt....

This sculpture is a representation of Thanos, so it is not exactly the same as the versions of the character, whether in movies, series or comics; although I did look quite closely at the movie version to make this sculpture.

Materials used:

  • Plasticine
  • Wire
  • Paper
  • Adhesive tape

If I miss any materials, I will mention them throughout the publication. Having said all this, let's begin.

The first thing to do for the modeling of this type of sculptures, is the skeleton. Plasticine is a very weak material, so you have to make a skeleton for the figure to keep its shape. However, for this particular case I started with the head, since it seemed a bit complicated to make the face; even so, I achieved a decent result, as shown in the image below:

I must confess that during the molding of the face I concentrated so much that I forgot to take pictures of a part of the process, that's why there is a jump of steps between image 5 and 6, being that in this last one you can see the head of the sculpture fixed on the wire skeleton. That said, let's continue...

In the image you have just seen, you can clearly distinguish the materials used for the skeleton, wire, paper and adhesive tape. The paper is used to fill the skeleton, as if it were muscle; the adhesive tape is used to keep the paper fixed, to cover it later with the plasticine. That is the next step, to start covering the skeleton with plasticine; I started with the lower part:

In the image you can see how I covered with brown color, and then molded until the desired shape was achieved. I helped myself with a toothpick to continue molding and shaping the folds of the pants, as shown in the following image:

After finishing with the figure's pants, I started working on the boots:

Here I had to mix orange, brown and yellow plasticine to obtain a color similar to gold, which I used for the boots and other accessories. I helped myself with a toothpick and a modeling tool to shape the boot. One boot first and one later:

Next was the knee pads. These I made with "golden" and dark blue plasticine (just mix blue with a little black). The result is as shown in the following image:

Once the lower part of the figure was finished, I continued with the upper part. For this I covered the torso with dark blue plasticine and molded it to the desired shape:

In this part I paused in the torso and concentrated on the arms, since I covered the torso with blue plasticine only to define the shape that the figure would have. Once this was done, I first covered the left arm with purple plasticine and then I molded it until the desired shape was achieved, as shown in the following image:

With a needle I made the details of the left arm (22), then I continued with the right arm (23) and molded until the desired shape was achieved (24 and 25):

To make the hand of the right arm I simply placed a small ball of plasticine on the forearm and flattened it (26), then I placed each finger one by one, helping me with a needle to smooth the joint between the hand and each finger (27).

As many will remember, Thanos has a glove on his left hand, so after finishing the right hand, it was time to make the glove. The first thing I did for this was to make a sort of stump on the forearm (28), on this I placed the body of the glove (29), using a needle to make the smallest details (29 and 30). Finally, I placed what would be the hand without its fingers (31).

To make this glove you have to be patient, that's the key. If you don't believe me, look at the following steps: place the thumb and a cover on top of the hand we had placed before (32); make a hole for each finger in that cover (33); model the index finger, make the details with a needle and place it in the corresponding place(34), model the middle finger, make the details with a needle and place it in the corresponding place(35), model the ring finger, make the details with a needle and place it in the corresponding place(36), model the little finger, make the details with a needle and place it in the corresponding place(37). This does not end here...

With a needle I made the details on the cover of the glove, placed holes for the six gems (38) and placed each gem in its respective place (39).

A parenthesis here, my cousin wanted to help me make the gems, so there she is, making the little gems that I would later place on Thanos' gauntlet:

We continue. Once our glove is ready, we return to the chest. I helped myself with a needle to shape all the folds of the clothes until I got the desired result. I also used a strip of gold and brown plasticine to make a belt. Later I would fix it in more detail, it was just to have a reference of where the belt would be.

Use more gold plasticine for the chest plate (41) and brown plasticine for shoulder plates (42).

I used the same brown plasticine for the back details (43) and gold plasticine for the back plates (44). Finally I used a needle to shape the folds of the clothes (45).

At this point the figure is already in the shape of Thanos, as shown in the image below. Here I skipped some steps because I didn't take pictures, but practically what I did was to finish the belt, place a couple of folds with blue plasticine and a few pieces of "fabric" that hangs from the blue part of Thanos' uniform.

In the front area I finished details of the gold plate and torso.

Finally I fixed the belt and made details on the shoes with a needle. I also shaped the green base of the figure into grass.

And this is how my Thanos sculpture is finished. I leave you with the photos I took from different angles.

Well, I hope you liked the sculpture, as the intention was to submit something of quality for the contest. Thanks to the HiveDiy community for the opportunity to participate in this wonderful contest and for the good reception. If you would like to leave your opinions, feel free to do so in the comments, I will be happy to read them. With nothing more to add, I'll say goodbye then....

See you next time!




Imagenes editadas con Photoshop
Fotos tomadas con tablet HP stream 7
Photos edited with Photoshop
Photos taken with HP stream 7 tablet

Últimos tres post/Last three posts:
Sculpture #2: oldman reading / Escultura: señor leyendo
El naufragio del Irasema (Parte II)
Weekend of cats, books, antiques and food / Fin de semana de gatos, libros, antigüedades y comida



0
0
0.000
50 comments
avatar

Congratulations @gaboamc2393! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 250 HP as payout for your posts and comments.
Your next payout target is 500 HP.
The unit is Hive Power equivalent because your rewards can be split into HP and HBD

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

0
0
0.000
avatar

This could be a new splinterlands character, I know there is a co test for that aswell, or a contest where people have to make up a meme or make up a story line for this figurine.

I love the blog the layout the figure and the work you put into it! Well done
And have a great weekend

@nurseanne84 hkw cool is this blog, go work your magic and make a woman to match this man

0
0
0.000
avatar

Thank you very much for the support, I'm glad you liked it, the intention was to make something good for people to enjoy reading it as much as I enjoyed making it.

Greetings and blessings!

0
0
0.000
avatar

Guao! eres un verdadero maestro en estas artes. Tu trabajo es impecable y espectacular.

Estamos contentos de ver tu participación en Mundo moldeable, gracias por mostrarnos cómo se hace <3

Tengo curiosidades: tu escultura brilla, le diste algún acabado con pega u otro material? jamás he visto plastilina de color dorado, hiciste mezclas?

Te ha quedado espectacular.

0
0
0.000
avatar

¡Hola! ¡Me alegra que te haya gustado! Es un placer contribuir con contenido en esta comunidad.

Y con respecto a tus preguntas, no, la plastilina es así por algún motivo que desconozco. Cuando la estoy trabajando no tiene brillo, pero cuando termino el trabajo, suelta cierto aceite que la hace brillar, como si le hubiese agregado esmalte o algo así, y lo cierto es que no agrego nada.

Y sí, en el post explico que hice mezclas para obtener esos resultados. De hecho acostumbro a mezclar colores para lograr los que normalmente no tienen en el empaque. Mira esto por favor:

Esa es una serie de colores que preparé. Ninguno venía en el empaque pero se pueden hacer tal como un pintor mezcla pinturas para su cuadro. A falta de colores, buenas son las combinaciones.

Saludos cordiales!

0
0
0.000
avatar

Guao! cuanta plastilina. Está genial, gracias por resolver mis inquietudes.

0
0
0.000
avatar

Quedó genial, muy buen trabajo ☺️

0
0
0.000
avatar

Mi amigo tu escultura ha quedado increíble o mejor dicho no tengo palabras para expresar como quedó. La verdad siempre me ha gustado hacer esculturas así, pero apenas se hacer una vaca con plastilina, voy a tratar de ponerme hacer algunas otra forma. Pero la verdad me ha encantado esa escultura, y con el efecto del brillo que tiene aún más bello quedó. Saludos Dios te Bendiga.

My friend, your sculpture is incredible or rather I have no words to express how it turned out. The truth is that I have always liked to make sculptures like this, but I barely know how to make a cow with plasticine, I'm going to try to make some other shapes. But the truth is that I loved this sculpture, and with the glitter effect it is even more beautiful. Greetings God Bless you.

0
0
0.000
avatar

Waaaooo, te pasasteeeee!!! Me diste una grata sorpresa, yo amo a Thanos. Te quedó maravilloso. Te felicito por tal pericia al hacer los detalles, sobre todo en su carita y en el guante, estoy impresionada.
Definitivamente cada día más fan de tu trabajo.
Un abrazo para ti y para la linda ayudante.

0
0
0.000
avatar

You said you would make it on a curation, now i see it, all I can say is this:

untitled.gif

Is a great sculpture and i loved it very much, thank you for your hardwork you just prove your skill, and then go past it and improved <3

0
0
0.000
avatar

que gran proceso para hacer esta escultura. Te felicito.. Quedo genial!

0
0
0.000
avatar

Ya había votado esta publicación pero no habia comentado, asi que ahora vengo para decirte que esta espectacular tu trabajo. Felicitaciones por tu premio. Este Thanos quedo tan bonito que es una lástima que se dañe ¿hay algo que ponga la plastilina fuerte y que la escultura dure mucho tiempo?

0
0
0.000
avatar

Gracias por el apoyo y los buenos deseos! Y sí, es una lastima que algunas se dañen, pero no siempre es así. Verás, yo he hecho figuras que han estado años conmigo, la cuestión es cuidarla. Es como esas figuritas de porcelana que tienes en lugares donde nadie las pueda tocar, solo mirarlas y ya. Con estas figuritas el cuidado es el mismo; sin embargo, el polvo y las impurezas pueden deteriorarla porque se le pega, así que yo acostumbro a usar Cristagel para darles una capa que endurezca un poco la figura y la proteja. A algunas figuras les he dado una capa de barniz transparente DESPUÉS de darles una capa de cristagel, ayuda a conservarlas por más tiempo, pero esto último funciona dependiendo mucho del tipo de plastilina, ya que algunas se decoloran con el barniz, así que yo solo recomiendo el cristagel para todo tipo de plastilina n_n

Aunque para hacer figuras que perduren sin mucha complicación, yo recomiendo usar masa flexible y mezclarla con plastilina. La mezcla resultará en colores pasteles, pero puedes hacer figuras con esta masilla que se endurecerán y quedarán con un acabado muy bonito.

Saludos cordiales!

0
0
0.000
avatar

Sería genial conservarlas en una cajita de cristal, pero seguro sería costoso. Por ahora es bueno que conserves las fotos desde varios ángulos, te pueden servir como portafolio de tu trabajo. Sigue haciendo estás obras de arte. Y también improvisa creando las que salgan de tu imaginación! Saludos y éxitos! 🤗

0
0
0.000
avatar

Increíble! Te ha quedado muy bien. Saludos!

0
0
0.000
avatar

Hey gracias por comentar, me alegra que hagas una buena valoración de la figura. Saludos cordiales!

0
0
0.000
avatar

Tienes un talento espectacular!!! Bellísimo te quedó 😍 me encantó 🤗

0
0
0.000
avatar

Excelente trabajo, tienes gran talento para este arte. Felicitaciones.

0
0
0.000
avatar

Gracias por tu valoración, me alegra que haya sido de tu agrado. Saludos!

0
0
0.000
avatar

Quedó súper brutaaaaal

0
0
0.000
avatar

Me alegra que te haya gustado! Gracias por comentar, saludos!

0
0
0.000
avatar

Si todo muy brutal. El post y tú obra. Mis felicitaciones

0
0
0.000
avatar

Espectacular, bien merecido el premio. Muchas felicidades.

0
0
0.000
avatar

Uno se encuentra esta imagen en cualquier lado y no ha visto este proceso creativo, no creería que esta hecha de plastilina. Un trabajo fenomenal y que requiere paciencia y dedicación. Mis felicitaciones por tan estupenda creación. Saludos.

0
0
0.000
avatar

Gracias por el comentario! Si, lo bueno de estos materiales es que se prestan para hacer figuras que pueden parecer de plástico, porque al fin y al cabo la plastilina viene de ahí, del plástico. Muy distinto hacerlo de arcilla, que queda con una textura distintiva.

Buenos deseos y éxitos! Saludos!

0
0
0.000
avatar

Wow es un trabajo increíble sin duda alguna, y thanos es de mis villanos favoritos desde que leí la historia de sus orígenes y thanos quest, para mi el de la pelicula se queda corto ante el de los comics. Pero volviendo a tu trabajo, la verdad no tengo palabras para describirlo creo que genial se queda corto. Gracias por compartir tu arte y tu talento con nosotros. Saludos.

0
0
0.000
avatar

Ah entonces has leido los comics! Ciertamente el de los cines se queda corto con el de los comics. En las peliculas nos quedaron debiendo un Thanos con guantelete vs Entidades cosmicas jajaja...

Gracias por tu comentario, de verdad aprecio la valoración que haces de la figura, anima a seguir haciendo figuras así. Saludos!

0
0
0.000
avatar

Si, pero también quiero ver es el thanos vs thanos de infinity cruzaders.
Quisiera dejarte un buen votazo pero mi poder de voto anda bajista.

0
0
0.000
avatar

Esa si fue la saga del infinito... Y no te preocupes, con comentarios como el tuyo también me animo a seguir creando contigo de calidad!

0
0
0.000
avatar

Quedó espectacular, Gabo. Te felicito, eres muy talentoso, gracias por compartir con nosotros esas maravillas. Un abrazo.

0
0
0.000
avatar

This is amazing! excellent work friend! I would like to see more posts of this style. Greetings1

0
0
0.000
avatar

Guaoooooo. Maravillosooooo... Eres una gran artista, un escultor brutal... Felicidades. 🌈💖

0
0
0.000
avatar

Receive the support of the Crypto-Shots team for your excellent quality content. This is a great job, congratulations.


0
0
0.000
avatar

que bien te quedo mi pana es toda una obra de arte
!PIZZA

0
0
0.000
avatar
(Edited)

Hermano no había visto tu comentario, se perdió entre tantas notificaciones. Muchas gracias por tus palabras. Ha pasado mucho tiempo desde que hice esta figura y me alegra mucho que aún las personas les guste. Un abrazo.

!PIZZA

0
0
0.000
avatar
(Edited)

PIZZA! PIZZA! PIZZA!

PIZZA Holders sent $PIZZA tips in this post's comments:
elfino28 tipped gaboamc2393 (x1)
gaboamc2393 tipped elfino28 (x1)
@gaboamc2393(3/10) tipped @neruel (x1)

Join us in Discord!

0
0
0.000
avatar

Simplemente increíble !

0
0
0.000
avatar

Hola estimada discúlpame por tardar tanto en responder no había visto tu comentario. Gracias por pasar a leer y comentar, de verdad muy agradecido.

0
0
0.000
avatar

No te preocupes, mas bien gracias por responder aunque sea tarde. Que tengas una linda noche!!

0
0
0.000
avatar

Woow esto quedo supergenial broth. Sorprendido a plenitudes con tu talento. Thanos quedo increíble, aparte la forma y manera de dar expresión con los colores es maravillosa. Mucha paciencia en esto indiscutiblemente.

0
0
0.000
avatar

Saludos Neruel, esta figurita la hice hace un año aproximadamente imaginate jeje creo que esta es la mas vistoza que he hecho, hasta ahora creo que me quedo con esta como publicación pineada en mi blog porque no siento que haya hecho una mejor hasta ahora.

Saludos, gracias por tu comentario.

!PIZZA

0
0
0.000
avatar

Quedó fantástico, estoy muy asombrada de esta escultura de plastilina; además, soy fan de Marvel, eso hace que me guste muchísimo más. Felicidades de verdad, Dios bendiga tus manos.

0
0
0.000
avatar

Muy impresionante su trabajo , el modelaje en plastilina es un arte hermoso y dedicado, cuando joven lo practicaba pero las circunstancias me hicieron abandonarlo, te felicito.🌹🌷

0
0
0.000
avatar

Me gusto tu talento con la manipulación de la plastilina excelente me encantaron se lo dice un marionetero ,titiritero y ventriloquits of the puppet bravo.

0
0
0.000