[ESP-ING] ¡Reciclaje Creativo Challenge! - Botella de Vidrio Decorada || ¡Creative Recycling Challenge! -Decorated glass bottle

avatar
(Edited)

Polish_20200808_141702803.png

Hola estimados lectores un abrazo🤗

Hello dear readers a abrazo🤗

Hoy quiero participar en el Desafío de reciclaje creativo creado por @Jennyzer, como me encantan las manualidades es por ello que quiero ser parte de este desafio y despues de pensar en que hacer, me decidí por reciclar una botella de vidrio y unos CDs viejos rayados que tengo.

Today I want to participate in the Creative Recycling Challenge created by @Jennyzer, as I love crafts I want to be part of this challenge and after thinking about what to do, I decided to recycle a glass bottle and some old scratched CDs I have.

Vamos a reutilizar algunos materiales que tengamos en nuestra casa y así cooperamos con el medio ambiente, así que manos a la obra.

We are going to reuse some materials that we have in our house and in this way we cooperate with the environment, so let's get to work.


Materiales

PicsArt_080801.27.18.jpg

  • CDs usados
  • Botella de Vidrio
  • Papel sanitario
  • Pega
  • Papel de seda
  • Tijera o corta metal
  • Escarcha
  • Pintura Blanca
  • Pincel
  • Cinta decorativa
  • Silicona

Materials

PicsArt_080801.27.18.jpg

  • Used CDs
  • Glass Bottle
  • Toilet paper
  • Paste
  • Tissue paper
  • Scissors or metal cutters
  • Frost
  • White Paint
  • Brush
  • Decorative ribbon
  • Silicone

1594001180539.png

Paso a paso / Step by step


PicsArt_080801.31.08.jpg

Lo primero que vamos hacer es cortar triángulos del CDs, varios triángulos, a fin de que podamos cubrir nuestra botella, ello dependerá del tamaño de nuestra botella. Lo pueden cortar con tijera.

PicsArt_080801.29.28.jpg

The first thing we are going to do is to cut triangles from the CD, several triangles, so that we can cover our bottle, this will depend on the size of our bottle. You can cut it with scissors.


PicsArt_080801.34.59.jpg

Ahora vamos a colocar pega en nuestra botella, y con el papel de seda cortado en trozos,vamos a ir pegando por partes hasta cubrir nuestra botella. Vamos a esperar que seque.

20200807_180413.jpg

Now we are going to put glue on our bottle, and with the tissue paper cut into pieces, we will be gluing in pieces until our bottle is covered. We'll wait for it to dry.


PicsArt_080801.39.46.jpg

Después de haberse secado nuestra botella, vamos a realizar nuestra pasta para el relieve, agarramos un pote donde vamos a colocar papel sanitario un poco como 10 vueltas de papel pero cortados en trozos; vamos a aplicar un poco de agua que se moje el papel, luego le colocamos 2 cucharadas grandes de pega blanca y 2 cucharadas de pintura blanca y mezclamos hasta obtener una pasta.

PicsArt_080801.42.34.jpg

After having dried our bottle, we are going to make our paste for the relief, we take a pot where we are going to place sanitary paper a little as 10 turns of paper but cut in pieces; we are going to apply a little water that wets the paper, then we put him 2 big spoonfuls of white glue and 2 spoonfuls of white paint and we mix until obtaining a paste.


PicsArt_080801.44.52.jpg

Ahora vamos a comenzar a colocar nuestra pasta en la botella, comenzando de arriba hacia abajo. Vamos colocando la pasta y vamos colocando los triángulos de CDs que ya cortamos en el primer paso, como se muestra en la imagen. Y así vamos colocando pasta y retazos de cd, hasta llenar nuestra botella.

PicsArt_080801.48.36.jpg

Now let's start putting our pasta in the bottle, starting from the top down. We are placing the paste and we are placing the CD triangles that we already cut in the first step, as shown in the picture. And so we are placing pasta and pieces of cd, until we fill our bottle.


20200808_122609.jpg

Ahora vamos a colocar escarcha a nuestra botella, esto hay que hacerlo mientras nuestra pasta aun este húmeda para que pegue. le colocamos escarcha por todos lados y luego le colocamos una cinta en el borde del pico de la botella.

PicsArt_080801.53.22.jpg

Now we are going to put frost on our bottle, this has to be done while our paste is still wet so that it sticks. We put frost all over it and then we put a ribbon on the edge of the spout of the bottle.


Y el resultado final debe quedar así:

And the end result should look like this:

20200808_131920.jpg

20200808_131945.jpg


Espero que les gustará este pequeño tutorial, nos vemos en un próximo post ❤️ Bendiciones.

I hope you will like this little tutorial, see you in a next post ❤ ️ Blessings.


Algunos de mis proyectos:






Polish_20200710_111534166.png


Algunos de mis proyectos:






Polish_20200710_111534166.png



0
0
0.000
14 comments
avatar

Congratulations @yolimarag! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You published more than 70 posts. Your next target is to reach 80 posts.

You can view your badges on your board And compare to others on the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @hivebuzz:

Feedback from the last Hive Power Up Day
0
0
0.000
avatar

Que interesante la técnica del papel higiénico, le da una textura hermosa a la botella, sin mencionar que los Cds le dan un toque holográfico que me fascina, excelente participación.

Espero te hayas divertido reciclando, y gracias por participar.

(Sólo te falta colocar el link de tu participación, en los comentarios de la publicación del challenge)
0
0
0.000
avatar

Muchas gracias ya lo coloque se me había pasado. Si me encanta reciclar y las manualidades.

0
0
0.000
avatar

Muy llamativa, linda decoración amiga, saludos

0
0
0.000
avatar

muchas gracias mi linda, me alegro que te gustará

0
0
0.000
avatar
Thank you for sharing this amazing post on HIVE!
  • Your content got selected by our fellow curator @stevenson7 & you just received a little thank you via an upvote from our non-profit curation initiative!

  • You will be featured in one of our recurring curation compilations and on our pinterest boards! Both are aiming to offer you a stage to widen your audience within and outside of the DIY scene of hive.

Join the official DIYHub community on HIVE and show us more of your amazing work and feel free to connect with us and other DIYers via our discord server!

If you want to support our goal to motivate other DIY/art/music/homesteading/... creators just delegate to us and earn 100% of your curation rewards!

Stay creative & hive on!
0
0
0.000
avatar

Hola @yolimarag
Me alegra que promuevas el reciclaje, también soy fiel partidaria de cuidar nuestro planeta. Gracias por compartir.
Saludos

0
0
0.000
avatar

Muchas gracias me alegra que te guste al igual que a mi.

0
0
0.000
avatar
(Edited)

Hermosa creatividad que tienes, me gusta mucho el resultado, su color es increíble. Felicidades.

Saludos @yolimarag

0
0
0.000
avatar

Gracias de verdad por tu apreciación

0
0
0.000
avatar

Thank you for posting via our community. This post will be passed to other curation projects for more rewards ;)

0
0
0.000