Como Elaborar un Porta Celular de Pared.// How to Make a Wall Cell Phone Holder.

avatar

Hola queridos amigos esta oportunidad les traigo la elaboración de un porta celular de pared por el simple razón que cuando estas en la cocina realizando recetas es peligroso colocar el teléfono en el mesón y en la mesa ya que cuando estamos cocinando hay líquidos y si cae algo de estos líquidos al equipo celular este se puede dañar y podíamos dañar nuestro instrumento de trabajo. Acompáñenme a realizar este hermoso porta celular con material reciclable.

Hello dear friends, this opportunity I bring you the elaboration of a wall cell phone holder for the simple reason that when you are in the kitchen making recipes it is dangerous to place the phone on the counter and on the table since when we are cooking there are liquids and If any of these liquids falls on the cellular equipment, it can be damaged and we could damage our work instrument. Join me to make this beautiful cell phone holder with recyclable material.

20210526_195128.jpg

Materiales a utilizar:

  • Base de Cerradura de Hierro.
  • Foami de Color Rojo.
  • Estambre de Color Blanco y Rojo.
  • Pega.
  • Tijera.
  • Regla.
  • Marcador.
  • 2 Clavos.

The materials to use:

  • Iron Lock Base.
  • Red Foami.
  • White and Red Stamen.
  • Paste.
  • Scissors.
  • Ruler.
  • Bookmark.
  • 2 Nails.

20210526_171605.jpg

Proceso de Elaboración:

Para iniciar tomamos la base de la cerradura y comenzamos a medir con una regla para saber cómo vamos a recortar el Foami para poder forrar nuestro porta celular, una vez tenidas las medidas procedemos a corta utilizando una tijera todas las medidas tomadas.

Elaboration process:

To start we take the base of the lock and begin to measure with a ruler to know how we are going to cut the Foami to be able to line our cell phone holder, once we have the measurements we proceed to cut using a scissors all the measurements taken.

20210526_182147.jpg

Una de las medidas cortadas fue para el piso y los lados distantes rectangulares, tomamos esta medida y le agregamos pega y lo colocamos en el piso de la parte interna de nuestro porta celular como se muestra en la foto.

One of the measurements cut was for the floor and the rectangular distant sides, we took this measurement and added glue and placed it on the floor of the inside of our cell phone holder as shown in the photo.

20210526_182403.jpg

Luego tomamos la medida que se coloca en la parte de atrás interna de nuestro porta celular y el agregamos pega para colocarla la medida.

Then we take the measurement that is placed on the inside back of our cell phone holder and we add glue to place the measurement.

20210526_182646.jpg

La próxima medida que tomamos es la que termina de encofrar la parte interna del porta celular como lo podemos observar en la foto.

The next measure we take is the one that finishes forming the internal part of the cell phone holder as we can see in the photo.

20210526_185133.jpg

Luego tomamos la medida más larga que viene a cubrir toda la parte externa frontal y los lados del porta celular.

Then we take the longest measurement that covers the entire front external part and the sides of the cell phone holder.

20210526_190316.jpg

Para la decoración tomamos estambre de colores blanco y rojo y lo tejimos dándole vuelta para combinar ambos colores como se muestra en la foto.

For the decoration we take yarn of white and red colors and we knit it turning it to combine both colors as shown in the photo.

20210526_190659.jpg

Luego de haber logrado el tejido lo colocamos en orilla superior de nuestro porta celular utilizando pega

After having achieved the fabric, we place it on the upper edge of our cell phone holder using glue

20210526_190918.jpg

Tomamos el mismo tejido de estambre y lo colocamos en la parte frontal inferior de nuestro porta celular tal como lo observamos en la foto

We take the same yarn fabric and place it on the lower front part of our cell phone holder as we can see in the photo.

20210526_192517.jpg

Utilizando un cautín abrimos los agujeros al Foami en el mismo sitio donde están los agujeros de la base de nuestro porta celular.

Using a soldering iron, we open the holes to the Foami in the same place where the holes at the base of our cell phone holder are.

20210526_194720.jpg

Y así nos queda nuestro elegante porta celular.

And so we have our elegant cell phone holder.

20210526_195128.jpg



0
0
0.000
0 comments