[Esp-Eng] A mi manera: creación de logo HIVE y nombre de usuario para personalizar las fotos de mis manualidades. // My way: creation of HIVE logo and user name to personalize the photos of my handicrafts.

avatar

IMG_20210506_132323.jpg

IMG_20210506_132202.jpg

Español

Hola Amigos en Hive…

Feliz y bendecida semana, acompañada de mucha salud y éxitos.

¿Alguna vez han sentido el interés de personalizar las fotos para sus publicaciones? Como mis publicaciones en su mayoría son trabajos de manualidades/bricolaje donde se detalla el paso a paso, sentía debía hacer algo para personalizar mi publicación, para señalar el trabajo creado es mio, pero no quería nada que implicara ediciones y manejos de programas que suelen ocupar mucho tiempo, por eso decidí crear con cartulinas de colores el logo de @hive y mi nombre de usuario para colocarla como parte de la foto sin tener que estar editando ni nada por el estilo.

La intención será usarlo como acompañantes en lo que serán las fotos principales de mis próximas publicaciones. Como realizo trabajos que van de lo grande a lo pequeño, o visecersa, decidí crear el logo en tres tamaños distintos y así poder utilizar el que mejor se adapte para la foto principal del trabajo realizado. El nombre de usuario por su parte, lo hice de una sola medida y creo van muy bien en ese tamaño con los tres logos.

Si les gusta como me han quedado o si por el contrario consideran necesito mejor en algo, por favor háganlo saber en los comentarios, estaré atenta.

Acá les dejo los materiales utilizados, el proceso y las imágenes del trabajo. Es un trabajo súper fácil de realizar, así que los invito a que creen su abeja, su logo y su usuario y no los muestren en sus futuras publicaciones.

MATERIALES:

  • Dibujo a utilizar (logo y abeja)
  • Cartulina Negra
  • Cartulina Dorada
  • Cartulina Roja
  • Cartulina Blanca
  • Silicón frio
  • Tijera
  • Lápiz
  • Mucho amor…

PROCESO:

  1. Diseñar en una hoja blanca (de preferencia reciclada) el como queremos el logo definiendo tamaño, color y forma.
  2. Se marca y recorta en la cartulina negra la silueta de la abeja.
  3. Se marca y se recorta en la cartulina dorada las alas de las abejas. En este caso, utilicé una técnica de calado para solo enmarcar el borde de las alas. Yo utilicé color dorado, ustedes pueden utilizar el color se su preferencia.
  4. A lo que sería el abdomen de la abeja, le pegué tiras de cartulina dorada para que hiciera contraste con las alas, ustedes pueden utilizar un color distinto. Las franjas deben quedar exactamente al borde de la silueta, se deberá tener cuidado al recortar.
  5. Una vez listas las piezas, silueta y alas, ensamblar con el silicón frio, cuidando de no aplicar mucho pegamento no se desborde y manche a la abeja.
  6. Marcamos y Cortamos la cartulina roja con el logo de Hive, cuidando de respetar la simetría y la precisión de la forma para que el logo se vea bien.
  7. Pegamos las piezas rojas sobre la cartulina blanca, respetando la forma original del logo y cuidando las distancia entre las partes sean simétricas. Lugo de secado el silicón recortamos.
  8. Creamos en nombre del usuario, recortando las letras en cartulina negra y luego se pegan sobre un rectángulo de cartulina blanca.
  9. ¡listo! Tenemos un hermoso logo y nombre de usuario que podemos usar para personalizar nuestras fotos. Sobretodo la principal, aquella que detalla el trabajo final realizado.

English

Hello Friends at Hive...

Happy and blessed week, accompanied by lots of health and success.

Have you ever felt the interest in customizing photos for your posts? As my publications are mostly crafts / DIY works where the step by step is detailed, I felt I had to do something to personalize my publication, to point out the work created is mine, but I didn't want anything that involved edits and handling of programs that usually take a lot of time, so I decided to create with colored cardboard the @hive logo and my username to place it as part of the photo without having to be editing or anything like that.

The intention is to use it as a companion in what will be the main photos of my next publications. As I do work ranging from large to small, or visecersa, I decided to create the logo in three different sizes and thus be able to use the one that best suits the main photo of the work done. The user name on the other hand, I made it in one size and I think they go very well in that size with the three logos.

If you like the way I have done it or if you think I need something better, please let me know in the comments, I'll be attentive.

Here are the materials used, the process and the images of the work. It is a super easy job to do, so I invite you to create your bee, your logo and your user and do not show them in your future publications.

MATERIALS:
.

  • Drawing to be used (logo and bee).
  • Black cardboard
  • Gold cardboard
  • Red cardboard
  • White cardboard
  • Cold Silicone
  • Scissors
  • Pencil
  • A lot of love...

PROCESS:

  1. Design on a white sheet (preferably recycled) how we want the logo defining size, color and shape.
  2. Mark and cut out the silhouette of the bee on the black cardboard.
  3. Mark and cut out the wings of the bees on the gold cardboard. In this case, I used an openwork technique to just frame the edge of the wings. I used gold color, you can use the color of your choice.
  4. To what would be the abdomen of the bee, I glued strips of gold cardboard to contrast with the wings, you can use a different color. The strips should be exactly at the edge of the silhouette, be careful when cutting.
  5. Once the pieces are ready, silhouette and wings, assemble with cold silicone, being careful not to apply too much glue so that it does not overflow and stain the bee.
  6. Mark and cut the red cardboard with the Hive logo, taking care to respect the symmetry and precision of the shape so that the logo looks good.
  7. Glue the red pieces on the white cardboard, respecting the original shape of the logo and taking care that the distances between the parts are symmetrical. After the silicone has dried, cut out the pieces.
  8. We create the user's name, cutting out the letters on black cardboard and then gluing them on a rectangle of white cardboard.
  9. Ready! We have a beautiful logo and user name that we can use to personalize our photos. Especially the main one, the one that details the final work done.

Translated with www.DeepL.com/Translator (free version)



IMÁGENES / IMAGES


IMG_20210502_174350.jpg

IMG_20210502_174445.jpg

IMG_20210502_175506.jpg

IMG_20210502_175933.jpg

IMG_20210502_180745.jpg

IMG_20210502_180801.jpg

IMG_20210502_182712.jpg

IMG_20210502_183108.jpg

IMG_20210502_183135.jpg

IMG_20210502_174417.jpg

IMG_20210502_184212.jpg

IMG_20210502_184216.jpg

IMG_20210502_184519.jpg

IMG_20210502_190520.jpg

IMG_20210502_191448.jpg

IMG_20210502_191624.jpg

IMG_20210506_132223.jpg

IMG_20210506_132351.jpg



SALUDOS / REGARDS

Gracias por visitar, leer, apoyar y/o comentar

Thank you for visiting, reading, supporting and/or commenting


Todas las Fotos fueron tomadas con mi teléfono Redmi 7A.

Contenido original de @keco (fotos y texto) - Todos los derechos reservados Publicado en HIVE.


All Photos were taken with my Redmi 7A phone.

Original content from @keco (photos and text) - All rights reserved Posted on HIVE.



0
0
0.000
7 comments
avatar

Hola @keco como siempre excelentes tus trabajos, benditas tus manos y creaciones, te felicito. Esta idea de realizar tu propio logo de hive me parece fabulosa y original, ademas concuerdo contigo en que si te destacas mas por artes manuales hayas buscado esta alternativa. Felicidades y exitos

0
0
0.000
avatar

Hola @nildasalazar, gracias por tu comentario, me honras de corazón, me alegro te haya gustado.
Saludos, bendiciones y éxitos

0
0
0.000
avatar

Saludos! Debo decir que tienes talento para las manualidades. Tienen buen acabado.

0
0
0.000
avatar

Hola @suzaku8, gracias por tu apreciación.
Saludos, bendiciones y éxitos

0
0
0.000