Happy and blessed Monday, my favorite Mondays from @needleworkmonday today I made some slippers, it is the first time I made them and to be honest they did not fit me very well 🤣🤣🤣 my Children tell me that by hurting you learn 😅 and if I don't try, I won't learn so I've gotten to work and used for the first time the machine that my beautiful mother gave me @migda, it hasn't been so difficult for me, it's not that difficult Even though the seam is still very crooked 😅🙈 I saw several videos and I am improving in the process.

Materiales:

• Goma espuma dos tamaños, gruesa y delgada.

• Aguja e Hilo.

• Tijera.

• Tela.

• Cinta razo de 2,5 centímetros de diámetro.

• Maquina de Coser.

Materials:

• Foam rubber in two sizes, thick and thin.

• Needle and thread.

• Scissors.

• Cloth.

• Razo tape of 2.5 centimeters in diameter.

• Sewing machine.

💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞💞

Comenzamos 💕😁❤️ We started

Step 1: We are going to make the patterns to start with 💪😃 on a white sheet mark the shape of a shoe, and around it mark a centimeter for the whole piece, now cut it, we are going to fold it to half and place it on another blank sheet of each side you are going to mark 4 centimeters and now mark it complete as I show you in images 7, 8, 9, and 10 now we are going to cut and at the bottom of one side mark 1 centimeter on one side and go down, mark it and cut 🙈 this part is easy.

Step 2: Mark the pattern on the fabric and if it is your wish on the thinner foam rubber, cut the pattern from the fabric and place them upside down on the foam rubber and fasten it with a pin . Now we are going to cook it in the machine, what a thrill for me 😃💪 my first seam 😅🙈 you are only going to sew the bottom part and when finished cut what you have left over and turn it carefully now fasten it again with a pin.

Step 3: We are going to mark the template on the fabric and now with the help of needles, see placing the upper piece on the bottom as you see in the images, now go cooking. The edge with the machine is removing the needles and firing, at the end we are going to cook the 2.5-centimeter-thick ribbon tape all over the edge, when finishing the bottom template, leave a space to insert the thick foam rubber. cut and marked the same size as the template, then carefully cook the space that we leave and in this way we finish, to make the second pantunfla you must do this same process again.

I hope you like it and try it, so I learned just dare and you will achieve everything you propose Happy and Blessed day to all

Autoría del texto y todas las imágenes: @Marleyn , La edición de las imágenes las realicé yo misma, Por favor no Utilices mis fotos sin mi autorización, edites ni re-publiques mi material ¿Deseas ponerte en contacto conmigo? Escríbeme:
Correo electronico: [email protected]
Discord #Marleyn#7821
Twitter: @marleynleal1
Imstagran: @MarleynSoutache
YouTube: https://youtube.com/c/marleynlealramos
Facebook: @marleynsoutache

Authorship of the text and all the images: @Marleyn, I did the editing of the images myself, Please do not use my photos without my authorization, edit or republish my material Do you want to contact me? Write me:
Email: [email protected]
Discord #Marleyn#7821
Twitter: @marleynleal1
Imstagran: @MarleynSoutache
YouTube: https://youtube.com/c/marleynlealramos
Facebook: @marleynsoutache

Mi trabajo es mi pasión y cuando tu trabajo es tu pasión nada es imposible / My work is my passion and when your work is your passion nothing is impossible