back to work
hi community friends, greet back with me @dedigobelz. I wish you good health and good luck.this time I am really tired, but my desire to develop here is still burning. and this time i am with the work i am doing.
above are some of my tools used in shaping and cutting iron.
and the photo above is of how I formed a 4 square pattern, to use as a ring for iron blocks. and here I still use simple equipment that is easy to carry.
and the size of the iron used is 5mm.
The photo above is the part where I assemble an iron block, and I also put 2 elbows in it, and that serves to form a stronger block. I have to do it because of the soft soil texture in this area. and it can be seen from some of the photos below.
and to support the load of the building I used a bottle to make a wind spring under the foundation, and I calculated that one bottle was able to support the load - + 60kg from the ground. The soft ground texture made me have to think about taking into account the strength of the building. and so far I have used it in several building sites in an area like this, with success.
so the news of my work, have a nice day.