🎨 [Step by Step] Tutorial: ✨ 🐦 👛 Blue Canvas Fabric Bag with Brooch (long post!) 👛 🐦 ✨ - By: @Tesmoforia.

in creativecoin •  8 months ago  (edited)

“Do not ask yourself what the world needs. Ask yourself what makes you feel alive and do it. What people need is to live.”

• Howard Thurman •


Gif Bolsito de Lona By Tesmoforia 2019.gif

• Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2. Gif by @Vanuzza

• • •

At the beginning of 2010, part of my family emigrated to Colombia. Among them was one of my favorite cousins (her name was Nora, but we lovingly call her "Norita"), the only Crafter on the family besides me.

Before leaving, Norita gifted her supplies’ box to me, a small treasure chest full of beautiful threads, imported embroidery fabrics and orphaned pieces of unfinished projects.

I like to frequently sit down on the floor of my bedroom and take a look inside the box, touch each piece of fabric and think on the possibilities.


• D O • I T • Y O U R S E L F •
« Blue Canvas Fabric Bag with Brooch »

• • •

Bolso_Extra_04.png

• "A bag with the exact measures to carry 4 little/medium sketchbooks, and some tools." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

• • •

On this occasion, I found 2 pieces of a thick and rough fabric; when touching the most rectangular-shaped one, I knew it was going to be perfect to make a case, a small one (the other pieces was used to restore the lining of a new album that deteriorated because it was on storage for a very long time).

• • •

Bolso_Extra_01.png

• "I admit that the subliminal message wasn’t on purpose... UNLESS ~ " - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

• • •

Examining it well, its measures were enough to make a bag of not insignificant dimensions (at least, try to make one). Of course, I prepared myself to use every part of this piece without wasting anything, hoping I won't make a mistake (because I only had 1 chance).



« T O O L S
&
M A T E R I A L S »

12-01.png

Materiales_Tesmoforia_2019.png

• "The Chosen Fabric Piece, lining already cut to size, zippers and a pair of threads." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

• • •

Bolso_Extra_05.png

• "3 different needle sizes, and 2 different pin sizes." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

✨ Pins.✨ Royal Blue Thread.
✨ Big Ruler.✨ Decorative Brooch.
✨ Measuring tape.✨ Self-adhesive vinyl.
✨ Thick cardboard.✨ Gold Brooches.
✨ Scissors and Cutter.✨ Aquamarine Thread.
✨ Clothes iron.✨ Royal Blue Zipper.
✨ UHU Glue.✨ Strips of paper and soft cardboard.
✨ Pencil and Eraser.✨ Aquamarine Zipper.
✨ Clothes pins.✨ Sewing machine needle N° 16.
✨ Sewing machine.✨ Sewing machine needle N° 14.
✨ Pendant for the Zipper.✨ Sewing machine needle N° 10.

« STEP N° 1 »
• Installing the Main Zipper •

12-01.1.png

The first thing to do, after making sure that all sides of the fabric rectangle are clean and correspond to their measurements, is installing the main zipper of the bag.

12-01.png

Cierre_Tesmoforia_2019.png

• "Each tab measures approximately 4x4 cm, not including 1.5 cm internal folds." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

For that, we will prepare 2 fabric tabs that we'll sew at each end of the zipper; the reason for these tabs isn't only aesthetic, their function is to complete the space between the end of the zipper and the limit of the sides of the bag.

12-01.png

Cierre_2_Tesmoforia_2019.png

• "After ironing each piece, the tabs are sewn with a small stitch, using needle No. 14 and the aquamarine thread." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Once the tabs are fixed and ironed, we place the zipper on the edge of the main piece of fabric that is less wide, in its center, and we will sew the zipper with a basic seam using the royal blue thread.

12-01.png

Cierre_3_Tesmoforia_2019.png

• "The change of thread in several steps of the process can be somewhat annoying, but it's necessary, because it'll give us a cleaner and visually pleasing result." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will repeat the process with the opposite side of the piece of fabric, taking special care that the seam is as straight as possible.

12-01.png

Cierre_4_Tesmoforia_2019.png

• "The zipper should look like this after installed, right and backwards." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will turn the piece inside out and iron it at high temperature on its 2 sides. It's advisable to beat wrinkles from this step of the process because it would be very difficult later.


« STEP N° 2 »
• Sewing the Body •

12-01.1.png

The next sewing line will determine the width of the bag, so, before returning to the sewing machine, we will mark a straight line with the thick pins of about 5 centimeters away from the edge.

12-01.png

Costura_del_Cuerpo_Tesmoforia_2019.png

• "This part is very intuitive." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

When we've sewn both sides, that seam will consume 1 centimeter of each side, leaving 4 centimeters between the margin and the line of pins. This means that the bag will be 8 centimeters wide.

12-01.png

Costura_del_Cuerpo_2_Tesmoforia_2019.png

• "We will gently prick the corners until we get an air pillow." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

The distance marked by the thick pins to keep this "little air pillow" shape will help to keep the width distance in no more than 4 centimeters from each side; it is advisable to make a line with the pencil before taking it to the sewing machine.

12-01.png

Costura_del_Cuerpo_3_Tesmoforia_2019.png

• "And just like a pillow, we will turn it over and help it with our fingers so it takes its right shape." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

You can see at this part just how important it’s to take care that the seams are as straight as possible.

12-01.png

Costura_del_Cuerpo_4_Tesmoforia_2019.png

• "Yes, it’s beautiful, I know ;u; ~ " - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

The selection of the fabric is crucial to obtain this result, only those like "canvas" and "jean" stay still in this way without needing previous starch treatment.


« STEP N° 3 »
• Suspenders •

12-01.1.png

To make the suspenders, I used leftover fabric from the main piece of canvas, and some gold-colored recycled brooches.

12-01.png

Tirantes_Tesmoforia_2019.png

• "With a minimum space of 2 centimeters in the buckle, the brooch will be suitable." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Brooches like those are easily obtained in haberdashery stores, but I want to take note about how collecting them with time is very easy:

There are always belts and wallets that are damaged by use and age at home. Before discarding them, I always recommend removing buckles and brooches of this type.

12-01.png

Tirantes_2_Tesmoforia_2019.png

• "Each suspender is composed of 3 parts, 2 fabric + the brooch." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

As the image shows, we will iron the pieces and fold a small 0.5 cm margin inwards, then, we will hold it in place with a pair of clothes pins.

12-01.png

Tirantes_3_Tesmoforia_2019.png

• "We will place the brooch this way before sewing, to get the result of the second photo." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will sew as close as possible to the edge with the royal blue thread, without tightening the space left for the brooch, it should move loosely.

12-01.png

Tirantes_4_Tesmoforia_2019.png

• "Thread Change!" - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will now place the piece of blue fabric as indicated by the images, inside the widest piece of aquamarine fabric, and then we'll sew them with a small and tight stitch.

12-01.png

Tirantes_5_Tesmoforia_2019.png

• "On the left, you can see the piece turned over before and after being sewn." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will iron and finish off the suspenders by sewing a margin as close to the edge as possible.


« STEP N° 4 »
• Placing the Suspenders •

12-01.1.png

To install the suspenders, we will turn over our main piece and in the upper/lateral corners; we will undo the seam in front of the end of each zipper, as seen in the first photo.

12-01.png

Colocación_de_Tirantes_Tesmoforia_2019.png

• "When the seam is open, we’ll get the suspender in just a little bit, and we’ll pass over it with a narrow seam." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

The installation of the suspenders is very easy.

In this step, taking advantage of the fact that the bag is turned over, we'll pass over all the remaining internal "triangles" of the corners with the sewing machine, as seen in the third photo.

• Note: IT’S IMPORTANT NOT TO CUT THESE TRIANGLES •


« STEP N° 5 »
• Internal structure •

12-01.1.png

For the internal structure let's do some recycling.

Metal Hoop Folders, used to file invoices or office documents, are a very good choice. Its type of cardboard is especially strong and resistant; yes, the folders we choose at the end cannot be folded.

12-01.png

Estructura_Interna_Tesmoforia_2019.png

• "I got these folders in the laundry room of @Vanuzza :3c" - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We need to extract 5 pieces from those folders (4 for the sides of the bag, and 1 for the "floor"), in order to do this, we will use the ruler and the cutter very carefully. This part may take some time.

12-01.png

Estructura_Interna_2_Tesmoforia_2019.png

• "The cleaner the cuts, the better the result when we install them on the inner side of the bag." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

If the pieces have the right measurements and have been cut correctly, they should be placed inside the bag as follows (and held between themselves by making pressure against the canvas walls).

12-01.png

Estructura_Interna_3_Tesmoforia_2019.png

• "This is how they shall look like when placed inside." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

To give a boost of resistance, and make waterproof the internal structure of the bag, we will cover each of these pieces individually with self-adhesive vinyl.

12-01.png

Estructura_Interna_4_Tesmoforia_2019.png

• "The color of the vinyl should be equal to or close to the color of the fabric of the bag. Colors like red or black in this case would not work." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

After the inner walls are lined, if the bag gets wet by accident (or there is the need to wash it), the cardboard interior won't suffer.

12-01.png

Estructura_Interna_5_Tesmoforia_2019.png

• "It's advisable to be cautious with the amount of UHU, too much can stain the fabric and even trespass it." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will apply a generous amount (but not too much) of UHU in all the pieces, especially in the "floor" and the higher walls (of the side that has contact with the fabric), and we'll carefully getting them inside the bag.

12-01.png

Estructura_Interna_6_Tesmoforia_2019.png

• "The clothes pins will keep the entrance of the bag open, it's very important that the air circulates inside it so that the glue dries, and the fabric does not absorb its strong smell." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Now, with a weaker cardboard, we will make fine tabs to reinforce the interior (with precision) between the joints that form the joined walls.

12-01.png

Estructura_Interna_7_Tesmoforia_2019.png

• "These tabs will ensure that the joints don’t detach over time." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

This reinforcement serves to add extra resistance to the bag, being that it’ll possibly contain heavy items.

12-01.png

Estructura_Interna_8_Tesmoforia_2019.png

• "Inner Body Successfully Installed!" - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

At this stage, the shape of the bag must hold itself perfectly, keeping its beautiful and neat rectangular figure without disfiguring itself when resting.


« STEP N° 6 »
• 24hrs Drying and Preview •

12-01.1.png

From the previous step forward, we won't handle the bag until a minimum of 24 hours have elapsed.

12-01.png

Secado_24hrs_y_Preview_Tesmoforia_2019.png

• "Front and Back Side are almost Identical." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

To facilitate the drying of all its parts, we will hang it on a hook for common clothes, in a place with good ventilation and moderate entry of sunlight.

12-01.png

Secado_24hrs_y_Preview_2_Tesmoforia_2019.png

• "Left side, and right side." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We'll know that the UHU and the fabric are completely dry when the walls feel taut and a little rough.

12-01.png

Secado_24hrs_y_Preview_3_Tesmoforia_2019.png

• "Keep it away from the ground and surfaces that accumulate dust is recommended." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

If after time has elapsed, the bag has a strange aroma or the structure feels somewhat weak, let's wait another 24 hours before handling it.


« STEP N° 7 »
• Making the Lining •

12-01.1.png

To elaborate the inner lining of the bag, we'll repeat exactly the same steps that we used with the main piece of fabric, with the difference that we won't add a zipper. We’ll use a N° 10 Sewing Needle.

12-01.png

Elaboración_del_Forro_Tesmoforia_2019.png

• "The measures we'll use are exactly the same as those used for each one of the faces of the first piece of canvas." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

When ready, to verify that the measurements fit correctly, we will turn the lining over and place it on top of the canvas bag.

12-01.png

Elaboración_del_Forro_2_Tesmoforia_2019.png

• "If it looks this way, or a little tighter, it's well done. If it looks too baggy, we should reduce half a centimeter to both height and width." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Again, the color of the lining fabric must be equal to or similar to the color of the main fabric.

12-01.png

Elaboración_del_Forro_3_Tesmoforia_2019.png

• "This is how the lining shall look after ironed." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

The reason for ironing the lining at this point, is to make the lines/corner more visible, facilitating the installation of the internal pocket.


« STEP N° 8 »
• Making the Internal Pocket •

12-01.1.png

For the internal pocket, we will cut 1 piece of fabric with the exact measurements of one of the wide sides of the lining, but with an extra of approximately 2 to 3 centimeters in its dimensions.

12-01.png

Bolsillo_Tesmoforia_2019.png

• "We will cut this piece into 4 parts as seen in the image." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

We will repeat in this second zipper, the treatment of the appliques we gave to the first one.

12-01.png

Bolsillo_2_Tesmoforia_2019.png

• "Those tabs are just a little bit wider." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

As this zipper is internal, I chose to use one made with a resistant metal. It is wider than the main one and also heavier.

12-01.png

Bolsillo_3_Tesmoforia_2019.png

• "To install this zipper we don't need to change the foot of the machine, the regular foot will work well." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

After installing the zipper, we'll iron a hem that is in accordance with the measurements of the lining side where it will be installed.

12-01.png

Bolsillo_4_Tesmoforia_2019.png

• "Clean, neat and functional." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

When ironing the hem on each side, it's normal for remains to be irregular; detail that is easily resolved by trimming them a little or rolling them inside themselves (but with a maximum of 3 folds).

12-01.png

Bolsillo_5_Tesmoforia_2019.png

• "Top: before cutting the excess material. Bot: hems ready and ironed." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

If you notice any imperfections, at this stage of the process it's still possible to correct and remove some parts.

12-01.png

Bolsillo_6_Tesmoforia_2019.png

• "The size of the pocket is at will and discretion of the crafter. In my case, I left it high so that the weight of things inside the pocket does not deform the rectangular shape of the bag." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

With the help of thick pins, we’ll hold the pocket to one of the sides of the lining.

12-01.png

Bolsillo_7_Tesmoforia_2019.png

• "When we loosely sew a guide, the color of the thread should be striking and contrast with both the fabric of the material and the thread that will definitely be used." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

As the fabric of the lining is soft and less rigid than the canvas, we'll loosely sew the pocket with a large and baggy stitch; just hold it more firmly in position.

12-01.png

Bolsillo_8_Tesmoforia_2019.png

• "We’ll sew as close to the edge as possible." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

• Why loosely sewing a guide instead of directly sewing? •

Many people don’t like to sew this loose guide since they consider it a "more work", but this ensures that the final seam will be far more straight and perfect in comparison to just using pins to keep parts on their places. For example, tailors and professional designers always do this with all their creations.

12-01.png

Bolsillo_9_Tesmoforia_2019.png

• "Here you can see the capacity of the pocket." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

In order for the zipper to smoothly open and without locking, we will open it and rub a white candle against both lines of its "teeth" before moving to the next step.


« STEP N° 9 »
• Lining Installation •

12-01.1.png

For this step, we will turn the lining and iron it very well before introducing it to the piece of canvas fabric.

12-01.png

Instalacion_del_Forro_Tesmoforia_2019.png

• "This looks a little dangerous, and it is!." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

With the help of the smaller pins, we will stretch the lining against the walls of the piece of canvas in this way.

12-01.png

Instalacion_del_Forro_2_Tesmoforia_2019.png

• "We’ll also need pins at the corners." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

At this part, the lining borders and the main piece must match perfectly. If it does look this, then every step until now has been completed correctly.

12-01.png

Instalacion_del_Forro_3_Tesmoforia_2019.png

• "That’s how the lining looks inside." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Some pins near the zipper’s edge will make the work easier.

12-01.png

Instalacion_del_Forro_4_Tesmoforia_2019.png

• "We will load 1 traditional needle with royal blue thread." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

To fix the lining to the main piece of canvas, we'll use a basic stitch of °1, and we will cross only one layer of the canvas, between the zipper and the fabric in a vertical direction; the stitch won't be noticeable on the outside.


« STEP N° 10 »
• Strap •

12-01.1.png

For the handle of the bag, we will take a long piece of the fabric remaining from the main canvas piece cutout, we'll fold it three times its width, and sew with a medium stitch.

12-01.png

Cinta_Tesmoforia_2019.png

• "This is a basic but functional handle." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

If we don't like this strap, it can be replaced by a golden metal chain, which is much more elegant (although I think that chains for medium bags are uncomfortable, because they get buried in your shoulder if you carry too much weight).


« STEP N° 11 »
• Pendant •

12-01.png

Dije_Tesmoforia_2019.png

• "This pendant is also recycled, it's made of a solid and heavy pale golden metal." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

To facilitate the opening and closing of the bag, I chose a wide and thick pendant to hook it on the reel of the main zipper.


« STEP N° 12 »
• Installing Pendant •

12-01.1.png

To install the pendant, we’ll need to open the ring it has with the help of pincers. The reel of the zipper is very small and so the pendant is both functional and decorative.

12-01.png

Instalación_del_Dije_Tesmoforia_2019.png

• "It's advisable always choosing metal charms, plastic ones tend to burst with use." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

It's important to ensure that as an accessory, you shall combine it with the color and design of the other metal parts of the bag.


« STEP N° 13 »
• Balú Brooch •

12-01.png

Broche_de_Balú_Accesorios_Tesmoforia_2019.png

• "This Brooch belongs to one of my favorite brands for accessories. Originally it’s a brooch for jean jacket." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

To give it a more feminine touch, or make this bag more chic, I added a metal "rusted golden" pin, with multiple small and adorable charms.

12-01.png

Bolso_Extra_02.png

• "With this detail, the bag comes to life." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Details like these can also be considered a note of personality and charisma.

12-01.png

Bolso_Extra_03.png

• "Custom Made." - Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2.

12-01.1.png

Usually, this kind of brooches is quite economical, because they are mass produced, and can be accompanied or replaced by metal pins, which are currently so fashionable.


« R E S U L T »

12-01.png

Resultado_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Resultado_2_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Resultado_3_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Resultado_4_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Resultado_5_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

Resultado_6_Tesmoforia_2019.png

• Model/Bag/Photos by @Tesmoforia, with a Lumix/Panasonic DMC-FH2 •

12-01.1.png

I'm obviously not the most competent model (I TRY, OK?) to showcase this bag, but the best way to appreciate it is to see it in a person, especially if you wear clothes with a style and color according to the boho trend of the bag.

And I don't get upset if I get to be called pretty |ω・)💦



✨ 👜 Final Measures 👜 ✨

• • •

Height: 19,5 centimeters.
Length: 27 centimeters.
Width: 8 centimeters.


« These last weeks have been very exciting for me on Steemit »

[Note written on 03/08/2019]

• • •

Me on my Road to Happiness

• • •

🍓 FIRST: Against wind and tide, and despite the satanic chaos of the electric service in the country, I was able to participate in "Archdruid Gaming Contest | Gaming Decades: The 90's", and I won the first place! (STILL NOT OVER THE HAPPINESS); this is the 2nd contest in which I participate at this platform (and in the previous one, which was about drawing, I also won 1st Place).

Also, the post I made for the contest was N° 1 in trending with the hashtag: #Cosplay, and 6th place at the hashtag #Gaming

• • •

Tendencia Cosplay 22-07-2019 - 2.jpg

🍓
🍓 🍓 🍓

✨ 🏆 AND RECEIVED A VOTE AND MENTION OF @CURIE 🏆 ✨

🎊 Curie Author Showcase (July 24, 2019) 🎊

🍓 🍓 🍓
🍓

OHMAI,YES.jpg

• • •

I seriously invite you all to paya lot ofattention to @Elfranz, @Veryspider and @Archdruid to receive super valuable information about this fantastic initiative to celebrate every videogaming decade until the present. The last contest was about the 2000´s.

🍓 SECOND: Although I spent several days sick with fever and a lot of body pain, I was able to keep abreast of the new initiatives and tokens that began to circulate in the Steem ecosystem: #Palcoin, #Neoxian, #CreativeCoin, #SteemLeo, # SteemGeeks and others. I feel a bit sad that I couldn't find out about what was happening much sooner.

• • •

DrugWarsTesmoforia.jpg

• • •

🍓 THIRD: I started playing DrugWars , and I feel like I'm late for the party, but I'm really entertained with its "lore" and with all the little descriptions of the buildings, characters, and gangs. My brother @Orleanz is playing too and we are trying to understand it together.



Thank you so much for Reading!

✨ 🍓 ✨ Happy, soft and creative day to All ✨ 🍓 ✨

✨ 🍃 ✨

Tesmoforia_2018_Colores.gif

🍓 Text and All Images’ Credit: @Tesmoforia 🍓
🍓 Translation: @Vanuzza 🍓
🚨 Please don’t take, edit or re-post my content without my permission! 🚨
💌 Would you like to get in contact with me? Contacto.Tesmoforia@Gmail.com 💌
✨ Separators: @Vanuzza • Gif´s: Giphy.com ~


⚡ Tippin' Tesmoforia ⚡

SUPPORT ME ON KO-FI TESMOFORIA.png


Twitter - Tesmoforia.png Pinterest - Tesmoforia.png Instagram - Tesmoforia.png Facebook - Tesmoforia.png


commented.png comments.png payout.png posts.png voted.png votes.png


The separators and icons used in this post ARE NOT FREE TO USE, the Designer User @Vanuzza created them for me; and they are protected by Copyright, that’s to say, they can’t be taken neither used by third-parties. Please respect the property of other content authors and creators. Thank you.


⚜ All Rights Reserved / © T E S M O F O R I A - 2018/2019 ⚜

Authors get paid when people like you upvote their post.
If you enjoyed what you read here, create your account today and start earning FREE STEEM!
Sort Order:  


Felicidades, sigue haciendo un gran trabajo :)


This post was shared in the Curation Collective Discord community for curators, and upvoted and resteemed by the @c-squared community account after manual review.
@c-squared runs a community witness. Please consider using one of your witness votes on us here

Everything was just too much finesse and classical piece of Art.

This post has been appreciated and featured in daily quality content rewards. Keep up the good work.

Hello!

This post has been manually curated, resteemed
and gifted with some virtually delicious cake
from the @helpiecake curation team!

Much love to you from all of us at @helpie!
Keep up the great work!


helpiecake

Manually curated by @veryspider.


@helpie is a Community Witness.
For more information about our project,
please visit this month’s UPDATE post.