Bonito Portarretrato para Papá/Nice Picture Frame for Dad

avatar
(Edited)

Español

Hola queridos amigos de esta maravillosa comunidad un gusto saludarlos, nuevamente Espero que se encuentren muy bien deseándoles a todos una semana llena de bendiciones prosperidad y muchas ideas creativas para realizar.

El día de hoy quiero mostrarles Cómo realizar unos lindos portarretratos para el día de los papás llenando de emoción y de regalos maravillosos para ellos ya que se merecen toda la atención los gestos y regalos que podamos hacerle en su día.

Los materiales utilizados en la elaboración de nuestro portarretratos fueron los siguientes:

  • Foami escarchado y normal azul
  • tijera
  • silicón
  • exacto
  • hoja blanca
  • lápiz
  • regla

Comencemos a elaborar!

Paso 1

Lo primero que vamos a hacer es poner las fotos en el foamy y remarcarlas con el lápiz así de esta manera. luego vamos a dibujar en la parte de alrededor nuestro marco en formas onduladas así como manera de que quede en acuarela una vez ya listo nos vamos a encargar de recortar con el exacto delicadamente y luego recortar la parte de afuera para así ir dándole forma para los portarretratos.

Paso 2

Una vez ya listo nos vamos a encargar de fijar las fotos en la hoja blanca así de esta manera dejándole partes laterales Unas cuatro partes de la foto y nos vamos a encargar de recortar y tenerlas a las 3 así de esta forma

Paso 3

Lo que vamos a hacer es pegarlo junto con el marco azul así de esta manera agregando suficiente silicona esto lo vamos a realizar en las tres fotos el mismo procedimiento hasta quedar así de esta manera


Ahora nos vamos a encargar de recortar tres tiras dosis escarchado azul y uno en el foamy normal azul.

Paso 4

Estas la vamos a pegar con bastante silicon y asi quedara nuestros portarretratos.

Ahora vamos a hacer unos corazones en foamy escarchado plateado y lo vamos a recortar asi de esta manera luego lo pegaremos en las partea de las esquinas de los marcos asi de esta manera.

Paso 5

Luego solo pondremos un lazo de manera que pueda guindarse en la pared pegandolo en la parte de atrás asi de esta forma.

Y por último así terminamos con nuestros portarretratos hecho con mucho amor para el dia del Padre espero que les guste mucho.

Hasta la Próxima

Creditos

Las imágenes me pertenecen y las tomé de mi teléfono honor X5 Plus ,el traductor utilizado fue traductor Google, y las fotos las edité mediante la aplicación de canva.



English

Hello, dear friends of this wonderful community, it's a pleasure to greet you again. I hope you are all doing well. I wish you all a week full of blessings and prosperity and many creative ideas to create.

Today I want to show you how to make some beautiful photo frames for Father's Day, filling them with emotion and wonderful gifts, as they deserve all the attention, gestures, and gifts we can give them on their day.

The materials used to make our photo frame were the following:

  • Frosted and regular blue foam
  • Scissors
  • Silicone
  • Exacto
  • White paper
  • Pencil
  • Ruler

Let's start making!

Step 1

The first thing we're going to do is place the photos in the foam and outline them with the pencil like this. Next, we'll draw wavy shapes around the edges of our frame, so we can create a watercolor look. Once it's ready, we'll carefully cut it out with the Exacto and then trim the outside to shape it for the picture frames.

![](https://images.ecency.com/DQmc16954yoHW6Q9emtXD3 bbXzjFH1HoRP5aQvwi7uXM64R/1747770124332.jpg)

Passed 2

Once ready, we'll fix the photos to the white sheet, leaving about four sides of the photo. We'll cut them out and arrange them at 3 like this:

Step 3

What we'll do is glue it together with the blue frame, adding enough silicone. We'll do the same procedure for all three photos until they look like this. This way


Now we'll cut out three strips of blue frosting and one strip of regular blue foam.

Step 4

We're going to glue these together with plenty of silicone, and this is how our picture frames will look.

Now we're going to make some hearts out of silver frosted foam and cut them out like this. Then, we'll glue them to the corners of the frames like this.

Step 5

Then we'll just add a ribbon so it can be hung on the wall by gluing it to the back like this.

And finally, this is how we finish our picture frames, made with lots of love for Father's Day. I hope you like them a lot.

See You Next Time

Credits

The images belong to me and were taken from my Honor X5 Plus phone. The translator used was Google Translate, and the photos were edited using Canva.



0
0
0.000
3 comments
avatar

Muy sencillo y muy lindo, gracias, me diste una idea jajaja 👌👌

0
0
0.000
avatar

It looks great. It changes the outlook. Love it. You did a wonderful job! Thanks! Keep it up!


selected by @rezoanulvibes

0
0
0.000