Making a vine for beans [Eng/Spa]

Hello friends of Hive and Hive Garden, how have you been? Here everything is fine thanks to God and since today I had the day off for Labor Day, I got to work a little with the bean plants in the garden because they have grown quite a bit and here I tell you what I did.

I don't know if you remember that I had already told you before, that I had planted some vanitas seeds in the front part of the house, and some other bushes, and a few weeks ago, I also showed you the mesh or net that I made so that the vanitas could get entangled there and not be on the ground.

Well, today the bushes have grown a lot and some even have several flowers, and as this is a creeping bush it is being watered on the ground and I do not want this to happen because I have planted other bushes near them, some of vanitas, sweet potatoes or chaco, some of red beans and some of auyama, and I do not want all of them to get mixed up. So today I set out to solve this problem.

So I decided to make a support for them so that they would get tangled up in it and not get mixed up with the other bushes. Well, it turns out that in the house there is a piece of alfajor fence, a little more than a meter, so I grabbed it to make the support, after seeing where I was going to place it and present it, I took two aluminum tubes that I had saved and used it as a support to hold the fence, I gave it a few blows with a mandarria until the tubes were well buried and I made sure they were well firm, then I took some old wires and with these I fastened the fence with the tubes.

Looking where I keep the materials I got a piece of construction mesh and I also used it, I placed it at one end of the alfajor fence and fastened it to it and nailed a wooden stick on the other side to hold the mesh; this way I had a wider support so that the bush had enough space to hold on.

Then I took the bean bushes and put them close to the alfajor fence and I wrapped them around it, to help them and as they grow they will continue to hold on to it.

That way the bean and pod plants have a place to continue growing without covering the space of the other plants since they will grow upwards in the mesh and they do that work themselves, so everything is perfect and the best thing is that I did that work right now because soon they can begin to bear fruit.

And well friends, that's all for today, I will tell you later when the pods begin to appear. Greetings and another time I'll stop by.


Hola amigos de Hive y Hive Garden, ¿Cómo han estado? Por aquí todo muy bien gracias a Dios y como hoy tenía el día libre por el día del trabajador, me puse un poco a trabajar con las matas de frijoles que están en el jardín porque han crecido bastante y por aquí les cuento que fue lo que hice.

No sé si se acuerdan que ya les había contado anteriormente, que había sembrado unas semillas de vainitas en la parte de adelante de la casa, y de otras matas mas, y hace unas semanas atrás, también les mostré la malla o red que hice para que se pudieran enredar ahi las de vainita y no estuvieran en el suelo.

Bueno, al día de hoy las matas ya han crecido bastante y algunas hasta tienen varias flores, y como esta es una mata rastrera se está regando por el suelo y no quiero que pase esto porque tengo sembradas otras matas cerca de ellas, unas de vainitas, de batatas o chaco, unas de caraotas rojas y unas de auyama, y no quiero que se me mezclen todas. Entonces me puse hoy a solucionar ese problema.

Así que decidí hacerles un soporte para que estás se enreden en el y no se mezclen con las otras matas. Bueno, resulta que en la casa hay un pedazo de cerca de alfajor, un poco más de un metro, así que la agarre para hacer el soporte, después de ver en donde iba a colocarla y presentarla, tome dos tubos de aluminio que tenía guardado y lo usé como soporte para sujetar la cerca, le dí unos golpes con una mandarria hasta que quedaron bien enterrados los tubos y me aseguré que quedaran bien firmes, luego tome unos cables viejos y con estos sujete la cerca con los tubos.

Buscando en donde guardo los materiales conseguí un pedazo de malla de construcción y también la use, la coloqué en un extremo de la cerca de alfajor y la sujete de este y clave un palo de madera del otro lado para aguantar la malla; así me quedó más amplio el soporte para que la mata tenga bastante espacio para sujetarse.

Luego tome las matas de frijoles y las acerque a la cerca de alfajor y las fuí enredando en ellas, para así ayudarlas y a medida que vayan creciendo sigan sujetándose de esta.

De esa forma ya las matas de frijoles y vainitas tienen donde seguir creciendo sin abarcar el espacio de las otras matas ya que van a crecer hacia arriba en la malla y ellas mismas hacen ese trabajo así que todo perfecto y lo mejor es que hice ese trabajo ahorita porque pronto pueden comenzar a dar fruto.

Y bueno amigos, eso fue todo por hoy, ya las contaré luego cuando las vainas comiencen a aparecer. Saludos y en otro momento paso por aquí.

Photography|Fotografía: por @rsanchez0308, Cover created in/Portada creada en Canva, Separator and banner/separador y banner, Translated with www.DeepL.com/Translator (free version)



0
0
0.000

2 comments

What a great job, so much patience to do all that work and a lot of dedication hehe may they grow strong and healthy 😘

0
0
0.000