Esp-Eng Reparando punta de cargador de una portatil / Esp-Eng The wall spider devouring its prey but lost it

avatar

Hola a todos. Saludos mis queridos amigos Dclub y de Hive Blog. Para el día de hoy les traigo una reparación de la punta de un cargador de una computadora portátil el cual tenía el cable partido, cabe destacar que este cable lo habían reparado pero cometieron un error en dejarlo en forma horizontal, en mi caso no recomiendo ese tipo de reparación porque se daña muy rápido ya que muchas personas acostumbran a utilizar la portátil conectada y los movimientos hacen que se parta el cable.

Hi everyone. Greetings my dear friends Dclub and Hive Blog. For today I bring you a repair of the tip of a laptop charger which had a broken cable, it should be noted that this cable had been repaired but they made a mistake in leaving it horizontally, in my case I do not recommend that type of repair because it damages very quickly since many people are used to using the connected laptop and the movements cause the cable to break.

IMG_20211129_121009_0.jpg
@odanmedina

Paso 1 👣

Aca les muestro donde está partido el cable, que el termoreductible se dobló con facilidad.

Step 1 👣

Here I show you where the cable is broken, that the heat shrinkable bent easily.

IMG_20211129_120908_6.jpg
@odanmedina

Paso 2 👣

Corte el cable donde estaba partido y cubierto con termoreductible, para así poder realizar la reparación o soldar la punta de los cables.

Step 2 👣

Cut the wire where it was split and covered with heat shrink, so that you can make the repair or solder the end of the wires.

IMG_20211129_121009_0.jpg
@odanmedina

Paso 3 👣

Solde los cables de la punta del cargador.

Step 3 👣

Solder the cables to the tip of the charger.

IMG-20211130-WA0069.jpg
@odanmedina

Paso 4 👣

Una vez que solde con estaño los cables de la punta los cubrí con Silicon caliente para darle un doblez en forma de ( L ) para mayor durabilidad.

Step 4 👣

Once I soldered the tip wires I covered them with hot Silicon to give it an (L) -shaped bend for durability.

IMG-20211130-WA0059.jpg
@odanmedina

Ya finalizada la reparación procedí a probarlo, que funcionara nuevamente.

Once the repair was finished, I proceeded to test it, to make it work again.

IMG_20211129_124504_5.jpg
@odanmedina

Screenshot_20211130-203758.png
@odanmedina

Mis queridos amigos me despido de ustedes deseándoles éxito en todas sus gestiones y muchas bendiciones. Hasta la próxima

My dear friends, I bid you farewell, wishing you success in all your endeavors and many blessings. Until next time

Las fotos son de mi autoría tomadas con mi teléfono celular.

The photos are my own, taken with my cell phone.

Modelo. Umidigi A5PRO.

Model. Umidigi A5PRO.

Mí ubicación los llanos centrales de Venezuela.

My location is the central plains of Venezuela.



0
0
0.000
10 comments
avatar

@vaipraonde thank you for visiting and supporting my post, I wish you much success in all your endeavors. Greetings

0
0
0.000
avatar

Thanks. Same for you man. Success!!

🍀

0
0
0.000
avatar

Thank you very much @ mrhuman88 for visiting and supporting my post. Greetings

0
0
0.000
avatar

Thank you very much @ sd974201 for visiting and supporting my post, greetings I wish you much success in all your efforts

0
0
0.000
avatar

You are good. I also repair electronics.
I will follow. please you Follow me.
you look my wall.

0
0
0.000
avatar

This post has been manually curated by @bhattg from Indiaunited community. Join us on our Discord Server.

Do you know that you can earn a passive income by delegating to @indiaunited. We share 100 % of the curation rewards with the delegators.

Here are some handy links for delegations: 100HP, 250HP, 500HP, 1000HP.

Read our latest announcement post to get more information.

image.png

Please contribute to the community by upvoting this comment and posts made by @indiaunited.

0
0
0.000
avatar

Thanks @bhattg to the @indiaunited team for visiting and supporting my post. I wish you much success in all your endeavors and many blessings

0
0
0.000
avatar

Congratulations @odanmedina! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You got more than 400 replies.
Your next target is to reach 500 replies.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out the last post from @hivebuzz:

Hive Power Up Month - Feedback from Day 29
Hive Power Up Day - December 1st 2021 - Become an Orca!
0
0
0.000