Designing earrings with colored buttons (ESP/ENG)

zarcillos.png

Saludos a todos mis creativos, espero que hayan tenido un día maravilloso, productivo y lleno de energía.

Hoy les vengo a compartir unos aretes que hice con materiales sencillos y que todos podemos tener en casa, se trata de botones, sí esos botones con colores bonitos de blusas y vestidos que muchas veces quitamos y guardamos, como en mi caso lo hago jajajaja, creo que cuando somos artesanos cualquier material que podamos utilizar es bueno darle un segundo uso, una segunda utilidad y hasta una tercera, para hacer una variedad de accesorios, como aretes, pulseras, collares entre un sinfín de cosas lindas.

Fui a una tienda donde venden bisutería y vi varios accesorios con este material acompañados de hilos, pedrería y mucho color, pensé que era buena idea hacer algunos para lucirlos en un día de paseo a la playa, así que me puse manos a la obra y cree tres pares de diferentes colores, quedan muy bonitos y veo que muchas chicas los están usando.

Las fotos que verán a continuación fueron tomadas con mi teléfono modelo TECNO SPARK GO 2023.

Greetings to all, my creative people, I hope you had a wonderful, productive and full of energy day.

Today I come to share some earrings that I made with simple materials and that we all can have at home, these are buttons, yes those buttons with pretty colors of blouses and dresses that many times we remove and save, as in my case I do hahahaha, I think that when we are craftsmen any material that we can use is good to give it a second use, a second usefulness and even a third, to make a variety of accessories, such as earrings, bracelets, necklaces among a myriad of cute things.

I went to a store where they sell jewelry and I saw several accessories with this material accompanied with threads, rhinestones and lots of color, I thought it was a good idea to make some to wear them on a day trip to the beach, so I got down to work and I created three pairs of different colors, they are very nice and I see that many girls are using them.

The pictures you will see below were taken with my phone model TECNO SPARK GO 2023.

separador nuevo.png

IMG_20230912_111421_945.jpgIMG_20230912_130634_311.jpgIMG_20230912_132352_316.jpg

Materiales:

  • Alicate de punta fina.
  • Botones de varios colores y tamaños.
  • Material para diversos usos en bisutería.

Materials:

  • 1 fine-tipped pliers.
  • Buttons of various colors and sizes.
  • Material for various uses in costume jewelry.

separador nuevo.png

IMG_20230912_111421_945.jpgIMG_20230912_111718_200.jpgIMG_20230912_113332_106.jpg
IMG_20230912_114819_146.jpgIMG_20230912_114902_451.jpgIMG_20230912_115306_076.jpg

Para comenzar hacer estos primeros aretes, tuve que elaborar unas argollas para unir cada uno de los botones y darle forma, pensé que me podían servir unas argollas que saque de otros aretes que ya no utilizaba, pero eran muy pequeñas, por eso realice unas utilizando unos palitos de alambre que tenía entre las fornituras, para así poder ajustar los botones al modo que quería que me quedasen.

Estos palitos de alambre les di forma con la tenaza, lo primero que hice fue colocar uno de los palillos de alambre en uno de los botones y haciendo una vuelta hacia dentro fije los dos primeros botones.

Después hice un par de argollas con los palillos de alambre que primero estire bien retire las imperfecciones y doble haciendo una forma circular, estas me fueron útiles para unir la otra parte de los botones, el tamaño de las argollas dependerá del tamaño de los botones, que vayamos a emplear lo mejor es que la argolla sea más amplia para que los botones queden sueltos y tengan movimiento, en este caso mis argollas no son tan perfectas porque las hice con los materiales que conseguí de reusó pero si las comparamos todo se vería más lindo y profesional.

Seguido empleé para la pieza superior del arete, unas grapas decorativas para la parte donde colocaré el palillo en esta pieza, si pude utilizar las argollas de unión más pequeñas y adecuadas, lo cierto es que cuando algo nos gusta y queremos ver los resultados, nos las ingeniamos con los materiales que tenemos a mano luego improvisamos.

Y así culminó mi primer par de aretes de combinación, blanco, negro y plateado.

To start making these first earrings, I had to make some rings to join each of the buttons and shape them, I thought that I could use some rings that I took from other earrings that I no longer used, but they were too small, so I made some using some wire sticks that I had between the trimmings, so I could adjust the buttons to the way I wanted them to be.

I shaped these wire sticks with the pliers, the first thing I did was to place one of the wire sticks in one of the buttons and making an inward turn I fixed the first two buttons.

Then I made a couple of rings with the wire sticks that I first stretched well, removed the imperfections and folded making a circular shape, these were useful to join the other part of the buttons, the size of the rings will depend on the size of the buttons that we are going to use, the best is that the ring is wider so that the buttons are loose and have movement, in this case my rings are not so perfect because I made them with materials that I got from reused, but if we compare them everything would look more beautiful and professional.

Next I used for the top piece of the earring, some decorative staples for the part where I will place the toothpick in this piece, if I could use the smallest and most appropriate union rings, the truth is that when we like something and we want to see the results, we manage with the materials we have at hand then improvise.

And so culminated my first pair of combination earrings, white, black and silver.

separador nuevo.png

IMG_20230912_130634_311.jpgIMG_20230912_130819_151.jpg
IMG_20230912_130914_322.jpgIMG_20230912_131113_095.jpg

Comienzo con mi segundo par de aretes, y esta vez se me hizo más fácil debido a que tenía adelantado las argollas de inión de las piezas, y solo realice la combinación de tamaños y colores de los botones.

Luego con la tenaza ajuste cada argolla en los orificios de los botones, con la combinación, amarillo, negro y azul mora, son colores que van muy bien combinados.

Los palillos que use son palillos dorados, lo que hace un buen contraste a mis aretes.

I start with my second pair of earrings, and this time it was easier because I had the rings of the pieces in advance, and I only made the combination of sizes and colors of the buttons.

Then with the pliers I adjusted each ring in the holes of the buttons, with the combination, yellow, black and blackberry blue, they are colors that go very well combined.

The toothpicks I used are gold toothpicks, which makes a nice contrast to my earrings.

separador nuevo.png

IMG_20230912_132352_316.jpgIMG_20230912_132649_917.jpgIMG_20230912_132729_232.jpg
IMG_20230912_132922_395.jpgIMG_20230912_133003_043.jpgIMG_20230912_133302_762.jpg

Por último hice mis aretes favoritos que son los de color fucsia, estos no podían faltar, es un color que está en tendencia y son llamativos, también es mi color preferido.

En este caso, como en los anteriores, realice unas argollas plateadas utilizando unos palitos de reusó, también utilice unos palillos de acero antialérgicos, como en todos los anteriores, así cada uno hace un buen conjunto para el diseño, en este caso el palillo va ajustado en el mismo orificio del botón lo que sería fácil de cambiar si queremos colocarle otro palillo, tal vez con un cristal o con otra figura.

Mis apreciados amigos artistas, espero que mi publicación les sea de su agrado, y que a pesar de ser un producto sencillo, vale la pena hacerlos, ya que siempre la variedad es importante, así que no se limiten hacer las cosas pensando que no serán aceptadas porque existen personas que aman lo diferente a lo cotidiano.

Ha sido todo un placer para mí poder compartir con ustedes, gracias visitarme, esperando siempre que se encuentren bien, también espero volver a vernos en otra de mis publicaciones.

Abrazos infinitos para todos, en cualquier lugar que se encuentren ahora.

Finally I made my favorite earrings which are fuchsia, these could not miss, it is a color that is in trend and are striking, it is also my favorite color.

In this case as in the previous ones, I made some silver rings using some reusable sticks, I also used some antiallergic steel sticks, as in all the previous ones, each one makes a good set for the design, in this case the stick is adjusted in the same hole of the button which would be easy to change if we want to place another stick, maybe with a crystal or with another figure.

My dear artist friends, I hope you like my publication, and that despite being a simple product, it is worth making them, because variety is always important, so do not limit yourself to do things thinking that they will not be accepted because there are people who love the different from the everyday.

It has been a pleasure for me to share with you, thank you for visiting me, always hoping you are well, I also hope to see you again in another of my publications.

Infinite hugs to all of you, wherever you are now.

separador nuevo.png

social networks / redes sociales

Traductor Deepl

Translated Deepl

Ediciones Canva

Editions Canva



0
0
0.000

7 comments

Hola.
Que bonitos aretes, los fucsias también son mis favoritos jejeje.
Es buena idea para hacer combinaciones con la ropa.
Muy creativo.
Excelente.

0
0
0.000

Saludos mi querida amiga, gracias por tu apreciación, estoy muy complacida saber que fue de tu agrado. Efectivamente se ven muy bonitos combinados con la ropa.

0
0
0.000

So nice I love the earring, is so beautiful thank you for sharing

0
0
0.000

Thank you for your appreciation and appreciation.

0
0
0.000

Interesante manera de usar botones, nuy creativo el uso que le das para hacer estas prendas.

0
0
0.000

Hola amigo, siempre es bueno hacer de todo un poco combinar materiales diversos y atreverse a usar lo que se hace.
Aveces de los materiales más sencillos se puede crear lindas y útiles ideas. Gracias por la visita 😊🤗

0
0
0.000

La-Colmena-Curie.jpg



¡Felicidades! Esta publicación obtuvo upvote y fue compartido por @la-colmena, un proyecto de Curación Manual para la comunidad hispana de Hive que cuenta con el respaldo de @curie.

Si te gusta el trabajo que hacemos, te invitamos a darle tu voto a este comentario y a votar como testigo por La Colmena.

Si quieres saber más sobre nuestro proyecto, te invitamos a acompañarnos en nuestro servidor de Discord.


0
0
0.000