[ESP]-[ENG] RESTAURANDO LA DMAX || RESTORING THE DMAX

avatar

Que tal amigos de hivemotors estamos nuevamente acá con ustedes compartiendo el avance ahora sí luego de 6 meses de restauración de la luv DMAX que como pudiste ver en vídeo ya está casi lista para salir al ruedo después de haber quedado casi destruida...

What's up friends of hivemotors we are here again with you sharing the progress now after 6 months of restoration of the luv DMAX that as you could see in the video is almost ready to go to the wheel after being almost destroyed...

IMG_20211130_195426_020.jpg

IMG_20211130_195431_301.jpg

Había quedado bastante mal trecha desde este accidente y poco a poco se ha podido ir restaurando. El golpe había sido demasiado fuerte que lo veraz en breve y el proceso a sido el siguiente a si que... Comenzamos con el contenido restaurando la luv DMAX.

It had been quite bad since this accident and little by little it has been able to be restored. The blow had been too strong and the process was as follows .... We begin with the content restoring the luv DMAX.

IMG_20211130_195435_158.jpg

IMG_20211130_195432_601.jpg

Cómo puedieron ver desde varios ángulos no suposo una reparación sencilla y luego de varios meses el resultado de la reparación estética fue el siguiente y es acá donde entró en escena para continuar con la relación donde tuve que desarmar y volver a armar el tablero y armar el frente como terminar de hacer unas cosas para que encendiera con las menores fallas posibles.

As you can see from several angles it was not a simple repair and after several months the result of the aesthetic repair was the following and this is where it came into play to continue with the relationship where I had to disassemble and reassemble the dashboard and reassemble the front as well as finish doing some things to make it start with the least possible failures.

Tablero
Pues cuando comence el tablero estaba bastante desarmado y muy mal cuadrado a si que decidí volver a quitarlo y montarlo de mejor manera.

🇺🇸 Board
Well, when I started the board was quite disassembled and very badly squared so I decided to remove it and assemble it in a better way.

20211129_095125.jpg

Quite todo para darle un mejor acabado y lograr una mejor terminación ya que como pudieron apreciar estaba bastante mal colocado.

Una de las cosas que más me llevo tiempo fue dejar unas mínimas aperturas y que se viera bastante menos espacios abiertos y con un acabado más prolijo.

I began to disassemble everything to give it a better finish and achieve a better finish because as you could see it was quite poorly placed.

One of the things that took me the most time was to leave some minimal openings so that it would look much less open spaces and with a neater finish.

20211129_103512.jpg

luego de quitar tablero y otros plásticos hasta conseguír el acabado que queria dejándolo lo mejor posible con pocos detalles teniendo en cuenta que recibió un golpe bastante fuerte y llevar el habitáculo de esto.

after removing the dashboard and other plastics until I got the finish I wanted leaving it as good as possible with few details considering that it received a pretty hard hit and carry the passenger compartment of this.

IMG_20211130_195428_267.jpg

A esto dejándolo como nuevo con un golpe poco visible venciendo este primer objetivo de la mejor manera.

To this leaving it as good as new with a little visible blow beating this first objective in the best way.

20211129_131452.jpg

el cambio es mucho y por ahora es todo por ahora en esta parte del tablero, aún faltan unos pocos plásticos que no puse por seguir teniendo acceso a varias piezas que tengo que sustituir más adelante.

the change is a lot and for now is all for now in this part of the board, there are still a few missing plastics that I did not put because I still have access to several parts that I have to replace later.

Frontal

🇺🇸 Front

20211129_094922.jpg

Este es una de las partes que más cambio y que volvió a ser la misma comenzamos como acaban de ver y acabamos como verás en siguiente foto. .
Lo primero que hice fue cuadrar y colocar el siguiente faro buscando la mejor terminación posible ya que el problema era que no habían quedado del todo cuadrados los tornillos pero aún así este fue el resultado.

This is one of the parts that changed the most and returned to be the same we started as you just saw and finished as you will see in the next picture.
The first thing I did was to square and place the next headlight looking for the best possible finish as the problem was that the screws were not quite square but still this was the result.

20211130_090736.jpg

Un acabado bastante prolijo y ahora bien con el faro bien cuadrado es momento de colocar su parrilla no fue para nada complicado y el resultado es bastante satisfactorio y dejándome un buen sabor de boca para seguir con el siguiente pendiente en mi lista.

A pretty neat and now with the headlight well squared it is time to place the grill was not at all complicated and the result is quite satisfactory and leaving me a good taste in my mouth to continue with the next pending on my list.

20211130_091056.jpg

Motor

engine

IMG-20211208-WA0036.jpg

pues este no sufrio daños en su funcionamiento excepto por una parte de su cableado y uno que otro sensor que fue algo complicado de conseguir y por su tiempo detenida el sistema de inyección se había ensuciado por completo y tuvimos que lavarlo para que funcionase bien.

Inyectores

INJECTORS

IMG-20211208-WA0034.jpg

Cómo pueden apreciarlo están totalmente obstruida y esto debe estar completamente limpio y libre para que no dañe los inyectores y pueda funcionar sin problema el llenado de estos. Una vez limpio la camioneta funciono mejor y luego tuvimos que cambiar la válvula EGR que había sufrido bastante con el impacto.

As you can see they are completely clogged and this must be completely clean and free so it does not damage the injectors and can work without problem filling them. Once clean the truck worked better and then we had to change the EGR valve that had suffered enough with the impact.

IMG-20211208-WA0037.jpg

Actualmente la camioneta se encuentra rodando casi a la perfección solo faltaría poner nuevamente su sistema de gas ya que es bastante gastona de gasolina y bueno amigos toda restauración se puede hacer si tenemos las suficientes ganas y algo de presupuesto claro.

Currently the truck is running almost perfectly, the only thing missing is to put back its gas system as it is quite gas guzzler and well friends any restoration can be done if we have enough desire and some budget of course.

IMG-20211208-WA0038.jpg

Bueno amigos esto es el contenido por ahora espero que fuese de su agrado y muchas gracias por tu apoyo espero próximamente seguir subiendo contenido para ustedes de esta increíble restauración.

Well friends this is the content for now I hope it was to your liking and thank you very much for your support I hope soon to continue uploading content for you of this amazing restoration.

_145902.gif

  • Traducido desde Translated with www.DeepL.com/Translator (free version)

  • Las fotos son editadas desde canva, videos editados desde capcut desde mi Samsung note 8

  • Translated from Translated with www.DeepL.com/Translator (free version)

  • Photos are edited from canva, videos edited from capcut from my Samsung note 8



0
0
0.000
5 comments
avatar

Hermano muy buen proyecto, esto es genial, admiro tú trabajo por eso siempre echo vistazo a tus post. Aprovechando la oportunidad, quisiera saber si me podrías dar referencia de opinion sobre el Daewoo Matiz, gracias ante todo, espero tu respuesta. Saludos.

0
0
0.000
avatar

@musicmeister
Épale hermano con gusto El Daewoo matiz es un auto bastante económico tengo entendido he tratado muy poco con ellos, pero tengo entendido que sufren de tener poca fuerza y tienen constantes botes de aceites por lo poco parejo que es su motor al tener solo 3 cilindros, si vas a subir lomas puede quee cueste un poco.
es bastante cómodo muy parecido al spark también es muy ahorrador de combustible unos 15 a 16 km por litro en ciudad y 18 en carretera, sus repuestos son bastante económicos es un buen carrito.
Si consigues a un buen precio y en buen estado es una muy buena compra,te lo recomiendo bastante!

Saludos hermano espero sea de utilidad la referencia saludos

0
0
0.000
avatar

Muchas gracias hermano, si tengo la oportunidad de comprarme uno lo haré! he buscado por mercado libre sus precios de los respuestos y los veo accesible de acuerdo a lo que dispongo, si su motor es de 3 cilindro se entiende que le cuesta subir en peso, pero en recta me han dicho que es una máquina, ahora con tus recomendaciones estoy seguro de tener uno, muchas gracias mano.

0
0
0.000
avatar

Hola, tremenda reparación y latoneria, una pregunta, ¿Tu vives en el Zulia?

0
0
0.000