Una semana de muchas reparaciones [ESP-ENG]
¡Saludos! Por acá he vuelto con más sobre cómputo, estos días han estado muy duros por varias responsabilidades acumuladas pero doy gracias a Dios de que ha habido trabajo. En concreto estuve tratando unas 3 máquinas, esta primera es de la línea de las que ofrecían en Cantv, con un plan de pago, hace ya varios años.
Greetings! Here I am back with more about computing, these days have been very hard for several accumulated responsibilities but I thank God that there has been work. Specifically I have been treating about 3 machines, this first one is from the line of those offered by Cantv, with a payment plan, several years ago.
Cuando llegó estaba llena de polvo y con algunos cables atascados, me preocupó que ese polvo pudiese causar alguna falla así que empecé desarmando y quitándolo todo. Aunque este no fue el único problema que iba a encontrar, pues en el software también habían unas sorpresas. Pero, antes de llegar allá, seguiré con el hardware porque encontré una memoria ram de 1gb, cuestión que resulta bastante rara considerando que estos modelos traen 2gb de fábrica.
Ese detalle me hizo sospechar de que algún técnico de malos hábitos hubiese robado, así que avisé a los dueños para evitar malos entendidos. La fuente de poder estaba bien, no vi nada raro en el disco duro pero si noté un poco desgastada la unidad de CD.
When it arrived it was full of dust and with some jammed cables, I was worried that this dust could cause a failure so I started disassembling and removing everything. Although this was not the only problem I was going to find, because in the software there were also some surprises. But, before I get there, I will continue with the hardware because I found a 1gb ram memory, which is quite strange considering that these models come with 2gb from the factory.
That detail made me suspect that some technician with bad habits had stolen it, so I warned the owners to avoid misunderstandings. The power supply was fine, I didn't see anything strange in the hard drive but I did notice a little worn CD drive.
El sistema resultó ser uno modificado, un mini-OS, lo que me hizo sospechar más del cambio de pieza intencional. Cuando la encendí no reconocía el mouse y teclado usb pero si un teclado ps/2. Sospeché de la BIOS así que reinicié y efectivamente había una configuración que no permitía el funcionamiento de los puertos traseros, tan solo la cambié y al guardar e iniciar nuevamente todo volvió a la normalidad.
Antes de probar el ps/2 intenté usar un adaptador de usb a ps/2 para descartar, aunque los resultados no fueron los mejores y por eso fui directamente al teclado ps/2.
El objetivo original era verificar si la pc cumplía con los requerimientos para correr algunos programas de diseño, sin embargo, decidí hacer todo ese mantenimiento para que a lo mínimo funcionara para ofimática. Los programas que se solicitaban exigían mucho más de lo que ofrecía esta pc así que luego me trajeron una laptop para tratarla a ver si cumplía con los requisitos.
The system turned out to be a modified one, a mini-OS, which made me more suspicious of an intentional part change. When I turned it on it did not recognize the usb mouse and keyboard but it did recognize a ps/2 keyboard. I suspected the BIOS so I rebooted and sure enough there was a setting that did not allow the rear ports to work, I just changed it and when I saved and booted again everything was back to normal.
Before testing the ps/2 I tried using a usb to ps/2 adapter to rule out, although the results were not the best and so I went straight to the ps/2 keyboard.
The original goal was to verify if the pc met the requirements to run some design programs, however, I decided to do all that maintenance so that at the very least it would work for office automation. The programs that were requested demanded much more than what this pc could offer so then they brought me a laptop to try it to see if it met the requirements.
La laptop que me trajeron fue una HP no tan antigua como el primer paciente, su procesador y cantidad de ram (4gb) prometía más, pero tenía un reballing de antecedente por lo que exponerla a esfuerzos que la calentaran de forma prolongada (como los programas de diseño), sería imprudente por lo que lo mencioné al cliente al reportarle la situación. El sistema era de 32 bits así que tocó formatear e instalar todo lo necesario para el correcto funcionar.
A la par preparé una pc con características similares pero con un procesador un poco mejor, esta me la encomendaron para vender así que le instalé todo de tal forma que estuviese lista para hacer la comparación y se pudiese decidir en torno a cual tomar.
The laptop they brought me was an HP not as old as the first patient, its processor and amount of ram (4gb) promised more, but it had a previous reballing so exposing it to efforts that would heat it for a long time (such as design programs), would be unwise so I mentioned it to the client to report the situation. The system was 32 bits so I had to format it and install everything necessary for it to work properly.
At the same time I prepared a pc with similar characteristics but with a slightly better processor, this one was entrusted to me to sell so I installed everything in such a way that it was ready to make the comparison and I could decide which one to take.
De la última que hablaré hoy es de una PC bastante anciana, con más de 15 años para ser exactos. Llegó con problemas de reinicio así que sospeché de la fuente pero al cambiarla y hacer las pruebas comprobé que esta no era la causa de las fallas. Continué con la memoria ram a ver si ya había cumplido su tiempo de vida y estaba fallando, pero tampoco era la responsable del mal. Echándole un ojo a la placa noté que tenía un fuerte desgaste en los condensadores y sumado a que ya había descartado el resto de las piezas, concluí que la placa madre era la causante.
Dado que reparar ese tipo de fallas no es mi fuerte pues no suele hacer soldadura frecuentemente, pensé en remitirlo a un conocido que si hace esas soldaduras, sin embargo, considerando que la computadora es tan vieja, la inversión no vale la pena. Por ello le recomendé algunos sitios para comprar una nueva pc y guardé un respaldo de sus archivos de modo que sus registros no se perdieran.
The last one I will talk about today is a rather old PC, more than 15 years old to be exact. It arrived with reboot problems so I suspected the power supply but when I changed it and did the tests I found that this was not the cause of the failures. I continued with the ram memory to see if it had already fulfilled its life time and was failing, but it was not responsible for the problem either. Taking a look at the board I noticed that it had a strong wear in the capacitors and added to the fact that I had already discarded the rest of the parts, I concluded that the motherboard was the cause.
Since repairing that kind of failures is not my forte as I don't do soldering frequently, I thought of referring him to an acquaintance who does do that kind of soldering, however, considering that the computer is so old, the investment is not worth it. So I recommended a few places to buy a new pc and saved a backup of his files so that his records would not be lost.
Otras reparaciones que podrían interesarte:
Other repairs that might interest you:
Nombre de la publicación / Name of the post | LINK |
---|---|
¡Tenemos tus archivos! (Experiencia con Ransomwares) | 1 |
Formateando una PC del 2009 | 2 |
Formateando otro dinosaurio | 3 |
Lidiando con un plug estéreo dañado | 4 |
¿Imposible de bootear por USB? | 5 |
Una Foxconn golpeada por el tiempo | 6 |
Virutas problemáticas en una canaima | 7 |
Un frankestein en el cementerio de cómputo | 8 |
https://twitter.com/gabrielrr018/status/1522255128061001728
The rewards earned on this comment will go directly to the person sharing the post on Twitter as long as they are registered with @poshtoken. Sign up at https://hiveposh.com.
No manches!!, hay un poco de computadora en tu tierra
Es lamentable como muchos tecnicos abusan del desconocimiento de sus clientes para hacer sus chingaderas y asi poderle ver la cara a las personas, lo bueno es que lograste repararla y hacer que funcionara
Sii bro, definitivamente tenía como 5 años de tierra dentro. Por la parte de los abusos, pues es algo sumamente común por acá, he llegado a pedirles a los clientes que marquen sus piezas para que después no crean que les he cambiado alguna, muchos están predispuestos por todos los males que han escuchado o sufrido por parte de los que se aprovechan...