Haz esta Linda Caja Decorativa para Lazos y ganchos es muy fácil y económica. Make this Cute Tie and Hook Box is very easy and inexpensive.

avatar
(Edited)


Hola mis queridos amigos.
Bienvenidos a mi espacio preferido.

Después de varios días sin poder publicar, por falta de luz e internet, hoy quiero compartir con todos ustedes un paso a paso donde te mostraré como hacer una caja para guardar lazos y ganchos para el cabello de las pequeñas y no tan pequeñas de la casa.

Verás que es muy fácil de hacer y muy bonito para decorar el cuarto y a la vez mantenerlos ordenados.


Para este tutorial vas a necesitar:

CartulinasFoami mate y escarchado
TelaCinta de tela
HiloPinza de cabello
Pinturas y pincelesSilicón
ReglaLápiz
Dibujo o impresiónCuchilla

Listos los materiales comencemos con el procedimiento:


Paso 1:
Transferir dibujo al foami.

  • Remarca el dibujo con lápiz de mina blanda y coloca el foami sobre la pieza a pasar, luego dá la vuelta y con la ayuda de la tijera frota el papel, haciendo un poco de presión para que se pase al foami y repite el procedimiento con el resto de las piezas en los colores correspondientes y recorta cada pieza y en los puños de la blusa, haz un corte con la cuchilla, esto será para meter los brazos.

Paso 2:
Sombrear y delinear piezas.

  • Teniendo todas las piezas listas ahora moja el pincel angular en agua y pasa por un paño, dejando húmedo y luego moja la punta en la pintura piel morena y comienza a pasar por los bordes de la cara y brazos y después delinea los brazos y manos y cara,
  • Ahora rellena los ojos con pintura blanca y deja secar, luego pinta con color verde.

Paso 3:
Pintar cara y blusa.

  • Después de pintar en verde moja un pincel en pintura blanca y difumina o aclara la parte de arriba del ojo y deja secar, delinea el centro de los labios y deja secar, luego pinta el borde de los ojos, pinta las pestañas y coloca un punto de luz en los ojos con pintura blanca.
  • Rellena los labios con un rosa claro y aclara con blanco el labio inferior.
  • Luego sombrea la blusa con pintura rosada y pega los puños, deja secar y luego mete los brazos en los cortes hechos anteriormente con la cuchilla y aplica silicón para pegar.

Paso 4:
Armar la figura.

  • Ahora pinta sombreando el borde y líneas del cabello, deja secar y luego aplica silicón y arma el busto de la muñeca, recorta una tira de 1 o 2 milímetros e inserta por debajo de los brazos y luego aplica silicón y pega bien a la blusa y deja secar.
  • Aparte recorta un rectángulo del tamaño deseado.

Paso 5:
Hacer el lazo y pegar a la pinza.

  • Ahora dobla cada extremo de la tela al centro del rectángulo y amarra con hilo.
  • Luego marca en el foami la forma de la pinza y recorta por todo el borde y pega.
  • Recorta una tira de tela y forra la pinza dando vueltas alrededor y luego pegar con silicón y recorta el sobrante.
  • Para terminar coloca el lazo sobre la pinza y pega en el centro una cinta para unir a la pinza.
    Así quedará listo el lazo.

Paso 6:
Cortar y armar la caja.

  • Recorta un rectángulo del tamaño de tu preferencia y aumenta a cada lado una pestaña de 2 cm y remarca con la punta de la tijera esta línea, luego recorta, dobla y pega armando como si fuera una tapa.
  • Aparte mide sumando todos los lados y recorta una tira de ese largo y le colocas la altura deseada, luego mide y marca en esta tira o franja de cartulina y dobla en cada esquina de la base, aplica silicón en el borde y pega la tira para armar la caja, haz un poco de presión el el extremo superior hasta que pegue bien.
  • Armada la caja, recorta 2 tiras de cartulina del largo de cada lado de la caja x 2cm de ancho y también recorta 2 tiras en foami fucsia.

Paso 7:

  • Ahora pega con silicón las tiras negras en la parte superior de la caja, también la fucsia por el lado de adentro y luego pega por fuera, por toda la orilla del borde superior el foami fucsia.
  • Terminada la caja, ahora transfiere la palabra al foami, recorta y pega a un lado de la caja.

Paso 8:

  • En este paso en la parte del cabello de la muñeca, justo donde se recoge el moño, con una cuchilla, haz dos pequeños cortes donde te señalo en la foto 2 de este paso.
    (Puedes insertar cualquier gancho o pinza que desees para decorar el cabello de la muñeca)
  • Aparte aplica silicón por todo el borde del busto, pega sobre cartulina blanca y recorta por la orilla dejando 2 mm de borde y luego inserta un palito de madera mientras se pega.
  • Ahora inserta la pinza, cierra y cuando la quieras usar, solo tienes que sacarla.
  • Con un pedacito de algodón impregnado en tiza, pinta las mejillas.

Paso 9:

  • Por último, aplica silicón al busto de la muñeca y pega a la caja.
    Mira que tal te parece?

Aquí la fuente de inspiración:

https://www.pinterest.es/pin/476255729355538339/
Aquí mis fotos para que las mires y si te gusta este paso a paso, espero lo hagas.

Esta publicación está traducida con DeepL y editada con etiquetas HTML.
Las fotos tomadas por mi con mi Blu G5 y editadas con Pic Collage.

Y llegó la hora de despedirme, espero haya sido de tu agrado esta sencilla, útil y decorativa Caja para Lazos, pinzas, moñeras, ganchos o lo que desees guardar.


Muchas gracias por haber llegado hasta mi, por tu apoyo y si te gustó, deja tu mensaje, me encantará responderte.
Bendiciones para ti.

English:

Hello my dear friends.
Welcome to my favorite space.

After several days without being able to publish, for lack of light and internet, today I want to share with all of you a step by step where I will show you how to make a box to store bows and hair clips for the little ones and not so little ones in the house.

You will see that it is very easy to make and very nice to decorate the room and at the same time keep them tidy.


For this tutorial you will need:

CardboardsMatte and frosted Foami
FabricFabric ribbon
ThreadHair clip
Paints and brushesSilicone
RulerPencil
Drawing or printingBlade

With the materials ready, we start with the procedure:


Step 1:
Transfer the drawing

  • Outline the drawing with a soft lead pencil and place the foami on the piece to be transferred, then turn it over and with the help of the scissors rub the paper, making a little pressure so that it goes to the foami and repeat the procedure with the rest of the pieces in the corresponding colors and cut out each piece and on the cuffs of the blouse, make a cut with the knife, this will be to put the arms.

Step 2:

Shading and outlining pieces.

  • Having all the pieces ready now dip the angled brush in water and run it through a cloth, leaving it damp and then dip the tip in the brown skin paint and start going around the edges of the face and arms and then outline the arms and hands and face,
  • Now fill in the eyes with white paint and let dry, then paint with green color.

Step 3:
Paint face and blouse.

  • After painting in green dip a brush in white paint and smudge or lighten the top of the eye and let dry, outline the center of the lips and let dry, then paint the rim of the eyes, paint the lashes and place a highlight on the eyes with white paint.
  • Fill in the lips with a light pink and lighten the lower lip with white.
  • Then shade the blouse with pink paint and glue the cuffs, let dry and then put the arms in the cuts made earlier with the knife and apply silicone to glue.

Step 4:
Assemble the figure.

  • Now paint shading the edge and hair lines, let dry and then apply silicone and assemble the bust of the doll, cut a strip of 1 or 2 millimeters and insert under the arms and then apply silicone and glue well to the blouse and let dry.
  • Cut out a rectangle of the desired size.

Step 5:
Make the bow and glue to the clip.

  • Now fold each end of the fabric to the center of the rectangle and tie with thread.
  • Then mark on the foami the shape of the clothespin and cut all around the edge and glue.
  • Cut a strip of fabric and wrap it around the clip and then glue with silicone and trim the excess.
  • To finish, place the bow on the clothespin and glue a ribbon in the center to attach it to the clothespin.
    The bow is ready.

Step 6:
Cut and assemble the box.

  • Cut a rectangle of the size of your choice and add a 2 cm flange on each side and mark this line with the tip of the scissors, then cut, fold and glue assembling it as if it were a lid.
  • Then measure all the sides and cut a strip of that length and place the desired height, then measure and mark on this strip or strip of cardboard and fold in each corner of the base, apply silicone on the edge and glue the strip to assemble the box, do a little pressure on the top end until it sticks well.
  • Once the box is assembled, cut 2 strips of cardboard the length of each side of the box x 2cm wide and also cut 2 strips of fuchsia foami.

Step 7:

  • Now glue with silicone the black strips on the top of the box, also the fuchsia on the inside and then glue the fuchsia foami on the outside, all around the edge of the top edge.
  • Once the box is finished, transfer the word to the foami, cut it out and glue it to the side of the box.

Step 8:

  • In this step in the part of the doll's hair, just where the bun is gathered, with a razor, make two small cuts where I show you in photo 2 of this step.
    *(You can insert any hook or clip you want to decorate the doll's hair).
  • Then apply silicone all around the edge of the bust, glue on white cardboard and cut along the edge leaving 2 mm of border and then insert a wooden stick while gluing.
  • Now insert the clip, close and when you want to use it, just take it out.
  • With a piece of absorbent cotton soaked in chalk, paint the cheeks.

Step 9:

  • Finally, apply silicone to the doll's bust and glue it to the box.
    See how you like it?

Here is the source of inspiration:

https://www.pinterest.es/pin/476255729355538339/
Here my photos for you to look at and if you like this step by step, I hope you do.

This post is translated with DeepL and edited with HTML tags.
Photos taken by me with my Blu G5 and edited with Pic Collage.

And it's time to say goodbye, I hope you liked this simple, useful and decorative box for bows, clips, bows, hooks or whatever you want to keep.

https://files.peakd.com/file/peakd-

hive/elmundodebetty/23xAiD3Jxj1ZVXm8GBhzKG3NovED44DeAzhmVTMnfrmpNhipTxSf2hY6CXwSWEP3NAHrH.jpg
Thank you very much for having reached me, for your support and if you liked it, leave me a message, I will be happy to answer you.
Blessings to you.



0
0
0.000
11 comments
avatar

Hermosa caja ora la pinzas, me encanta.

El detalle del lazo te quedó bien chévere. Gracias por compartir. 🤗

0
0
0.000
avatar

Buen día amiga, gracias por comentar..
Bueno se me vino esa idea de colocarle esa pinza y lo mejor es que se le puede quitar y colocar otra jajajaja... bueno para que ella también luzca otros diseños...
Siempre encantada de compartirlos con ustedes.

0
0
0.000
avatar

Hiciste un bello trabajo y lo más que me gustó, fue el difuminado que hiciste en los ojos de la muñeca, se ven hermosos. Te felicito 👏. Saludos y Bendiciones 🙏🏻 😊.

0
0
0.000
avatar

Que bonita idea, me encanta como quedó la muñeca, siempre he querido aprender a hacer ese tipo de formas pero nunca me has salido bien, buen trabajo 😉

0
0
0.000
avatar

Hola María, me contenta mucho que te haya gustado.
Yo estoy a la orden, dispuesta a ayudarlos o responder alguna duda.
Saludos y muchas gracias por tu comentario.

0
0
0.000
avatar

Esta muy hermosa esa cajita y la muñeca me encantó💗💗

0
0
0.000
avatar

Hola amiga, muchas gracias por visitarme y comentar mi publicación.
Saludos y bendiciones.

0
0
0.000