DIY- pulsera nudo cuadrado variante con dije de yin yang✨ || Switch knot bracelet with yin yang charm ✨ [ESP/ENG]

avatar

Hola amigos de Hive ❤️ hoy les quiero compartir un pequeño tutorial para realizar una hermosa pulsera con temática de Yin Yang usando los colores característicos de hilo y lo que será la piedra central y una de las protagonistas de nuestro trabajo además del nudo que estaremos realizando, conocido como nudo cuadrado variante. Creo que esta técnica es bastante sencilla ya que partimos de un nudo plano simple, con la única diferencia que intercambiamos de color de hilo a medida que tejemos nuestra pulsera, yo decidí además darle un toque más agregándole algunas cuentas alrededor del dije, puede ser opcional o si te gusta, también lo puedes hacer. Si te gusta esta idea de diseño, te animo a que me acompañes y aprendas junto a mi a realizarlo, y ahora sí, sin más que agregar... Comencémos!!

Materiales:

  • hilo chino (blanco, negro)
  • cuentas (blanca, negra)
  • piedra forma de yin yang
  • Tijera
  • Encendedor

Primero vamos a medir 6 centímetros de distancia de todas nuestras hebras que serán un total de 4, todas de 70 o 80 cm aproximadamente de largo. Ahora sí, una vez tengamos nuestros hilos listos empezamos a tejer, y para ello voy a empezar como les expliqué anteriormente con un nudo plano con un color, luego, tomaremos los otros hilos del otro color y haremos otro nudo plano, tratando que en ambos quede una pequeña separación.

Vamos a continuar el patrón hasta obtener el largo deseado o unos 6cm aproximadamente, luego vamos a insertar nuestro dije o piedra de yin yang por los hilos centrales, y con los otros hilos sobrantes vamos a introducir varias cuentas, las suficientes hasta que rodeen todo el círculo. Yo decidí usar blanco y negro pero si quieres puedes jugar con el color de las cuentas en este paso.

Ya una vez tengamos la piedra y las cuentas insertadas, voy a cerrar esta parte con un nudo plano como venía tejiendo anteriormente, y ya a partir de allí continuamos repitiendo todo el mismo proceso hasta completar el otro lado de nuestra pulsera o que mida lo mismo 6 cm. Una vez terminado, hacemos un nudo simple y procedemos a cerrar nuestra pulsera con un nudo corredizo, esto lo podemos hacer una hebra de hilo de aproximadamente 20cm, haciendo varios nudos planos y cortamos el sobrante. También podemos hacer otros nudos al final de las hebras, y quemamos siempre las puntas para asegurar.

Y aquí les muestro la pulsera de yin yang terminada!!. Siguiendo un poco con mis trabajos anteriores en macramé, podemos crear nuevos diseños unicos y a nuestro gusto como comprados de un tienda. Puedes seguir mi guía tutorial o puedes dejar volar tu imaginación y hacerlo combinando los colores, piedras, cristales y el diseño que quieras... La creatividad es tuya y por supuesto un toque secreto de amor para que el trabajo quede con el mejor acabado 🥰.!! si te gusto te animo a que lo intentes, me encantó mostrarles este pequeño tutorial para tu uso personal, emprender o para regalar 😁...espero compartirles muy pronto nuevos trabajos, con mucho cariño me despido y será hasta la próxima !!💕

Hello friends of Hive ❤️ today I want to share with you a small tutorial to make a beautiful bracelet with Yin Yang theme using the characteristic colors of thread and what will be the central stone and one of the protagonists of our work in addition to the knot that we will be doing, known as variant square knot. I think this technique is quite simple because we start from a simple flat knot, with the only difference that we change the color of thread as we weave our bracelet, I also decided to give it an extra touch by adding some beads around the pendant, it can be optional or if you like it, you can do it too. If you like this design idea, I encourage you to join me and learn with me to make it, and now yes, without further ado.... Let's get started!

Materials:

  • Chinese thread (white, black)
  • beads (white, black)
  • yin yang shaped stone
  • scissors
  • lighter

First we are going to measure 6 centimeters of distance of all our strands that will be a total of 4, all of 70 or 80 cm long approximately. Now yes, once we have our threads ready we start weaving, and for this I will start as I explained before with a flat knot with one color, then, we will take the other threads of the other color and we will make another flat knot, trying to leave a small separation in both of them.

We are going to continue the pattern until we get the desired length or about 6cm approximately, then we are going to insert our yin yang pendant or stone through the central threads, and with the other leftover threads we are going to introduce several beads, enough to go around the whole circle. I decided to use black and white but if you want you can play with the color of the beads in this step.

Once we have the stone and beads inserted, I will close this part with a flat knot as I was weaving previously, and from there we continue repeating the same process until we complete the other side of our bracelet or that measures the same 6 cm. Once finished, we make a simple knot and proceed to close our bracelet with a slip knot, we can do this with a strand of yarn of approximately 20cm, making several flat knots and cut the excess. We can also make other knots at the end of the strands, and always burn the ends to secure.

And here I show you the finished yin yang bracelet!!!. Following a little bit with my previous works in macramé, we can create new unique designs and to our taste as bought from a store. You can follow my tutorial guide or you can let your imagination fly and do it combining colors, stones, crystals and the design you want.... The creativity is yours and of course a secret touch of love so that the work is with the best finish 🥰.!!! if you like I encourage you to try it, I loved to show you this little tutorial for your personal use, undertake or to give away 😁...I hope to share very soon new works, with love I say goodbye and will be until next time!

  • Todo el contenido es de mi autoría y las imágenes son de mi propiedad

  • Cámara: Redmi note 10s

  • Uso un aro de luz LED como base para mi teléfono y tomarme las fotos

  • All content is my own and images are my property

  • Camera: Redmi note 10s

  • I use an LED light ring as a base for my phone to take pictures of myself

Edición y Separador|Editing and Separator
App PicMonkey - App Picsart - App Canva

Traductor|Translator
DeepL



0
0
0.000
7 comments
avatar

Que bonitaa, es muy chévere que no se necesitan tantos materiales para elaborar la✨🤩

0
0
0.000
avatar

Hola amiga🤗 muchas gracias me alegro que te gustará...si la verdad no imaginas que con un simple nudo y con un lindo dije creas un hermoso accesorio ☺️. Un saludito para ti!!🤗💕

0
0
0.000
avatar

Que belleza, me encanto el tejido que realizaste, se ve muy delicado, y la manera en que combinaste las perlas arriba y abajo del dije central esta genial. Que tengas un día hermoso, saludos @edwarlyn11

!DIY

0
0
0.000
avatar

Hoola amiga!!🤗💕 Muchas gracias, me alegra que te gustara..ya tenía ganas de tener una pulserita con este dije y se me ocurrió combinarla con esos dos colores buscando un nudo llamativo pero a la vez bastante sencillo de realizar. Un saludito y feliz día para ti también !!🤗💕

0
0
0.000
avatar

Que bonito. Es dige está súper, pero el trabajo de mostacillas que hiciste alrededor de el le dan un toque único. Me gusta mucho la forma como trabajas las mostacillas. Para mí es algo muy complicado. Te felicito

0
0
0.000
avatar

Hoola amiga🤗muuchas gracias me alegra que te gustara mi trabajo, lo aprecio viniendo de tí...jeje al principio a mi también me costaba un poco pero creo que ya con la práctica le agarras el truquito 😄😁. Gracias por el apoyo una vez más, un saludito grande para ti!!🤗💕

0
0
0.000