Surface Protector Application Xp-Pen Deco 01 V2
In this tutorial you will learn how to peal the prepacked screen guard and apply the orginal surface protector to the xp-pen deco 01 v2 Graphic Drawing Tablet.
The surface protector comes along with the original set of items in the box itself.
The protector itself is 0.25 mm thin, so it is very susceptible to easy bending and folds that will remain on it permanently. If you have misplaced or damaged the original surface protector, you can easily purchase a pack of 2 from amazon. The pack of 2 is very cheap. It costs about $15 and can be found here https://www.amazon.com/XP-PEN-Drawing-Protector-Graphic-Protective/dp/B07CYHXS9L?th=1.
The protector itself has only one point of adhesion. This point has to be attached to the top of your graphic drawing tablet. Before application make sure the adhesive is clean and free of debris.
If it is the first time, make sure you remove the original surface protector so that there is better contact from the pen and overall a better reading on the tablet.
Due to the single point of adhesion, you can easily remove and replace the surface protector of the graphics drawing tablet multiple times.